guidedmiscle

I will check that out. thank you for the heads up

good food for thought, Thank you

Thank you DarthMarl

Have interest to purchase extended mag base pads for G20 mags Anyone know if SLRs are legal USPSA length? There sight doesn't mention what Mag oal would be using there base pad. Aredondo advertises legal length although Iv'e read people have had to sand off the stippling to get them to legal length, others said weren't successful

Have 34 gen 3, Can gen3 17 slide be used on 34 frame? contemplating in thought of quicker reacquirement of sights

Have interest to check out Berry's 185gr HBRN for Icore shooting minor power factor (thinking not pushing the limit in regard to complications) anyone run oal shorter to compensate for additional case capacity in respect to hollow base? Have WST, Hogdon clays, 700x. 625 has 5 in barrel. Thank ahead of time for feedback

Have interest to check out Berry's 185gr HBRN for Icore shooting minor power factor (thinking not pushing the limit in regard to complications) anyone run oal shorter to compensate for additional case capacity in respect to hollow base? Have WST, Hogdon clays, 700x. 625 has 5 in barrel. Thank ahead of time for feedback

.40 Long loaded data got it. I was contemplating if I was going to need to go to a bit slower burning powder Thank you

I have completed a G20 build to use for USPSA. I am interested to learn powders that work well for reduced 10mm loads. What I have to work with 180 gr. plated bullets and 200gr DG polymers, WST, Clays, 700x, CFE. Thankyou

Have old Para thats 38 super i run 38 super comp. will super comp work in non spacer 9mm mags?

After reading this thread I'm ordering some Mecgars for my Camerons Custom 1911 9mm build. Thank you all for your imput!

Yes, ima45dv8 is correct regarding Dawson. I had contacted them and got the big negative. I have checked out the Carver, its nice magwell unfortunately there is raised flange area to get heal of hand purchase that I am looking for. Only one I have seen so far is SLR. https://slrrifleworks.com/gen-3-g20-21-magwell/ Thought I would check around before purchasing SLR, It does look like could be good option. And thank you RePete

Looking for recommendations regarding magwell for std (not sf) gen3 that has good heal of hand purchase. Thank you ahead of time for feedback

Didn,t know that, very good info, Thank you

First thank you all for input, recommendations,considerations, I appreciate it very much. 20 or so yrs ago I loaded 10mm to 178 PF using 200 gr RN, USPSA major was 175 at that time. I was shooting 45 acp frequently out of a 1911, Para (200 gr SWC), G21 gen2 (225 TC) and a S&W 625 230RN all around 178 PF. The semi autos were using reduce power springs including the G20. When shooting the G20 I was thinking this doesn't seem right, The G20 shot softer. I've wanting to get back to that project for quite some time. Allot of new stuff has came out since. If is better, smarter to do this project on a Gen 3 or newer I'm not wanting to waste time and money my Gen 2. If Gen 2 is good or has some benifit, I,m happy to go with that! I had heard of a SF frame but didn't think of it and never had my hands on one. I've held a G40, that is Gen4 it felt good, My Gen 2 doesn't feel bad. Seems like I had heard (several years ago) the Gen 4 doesn't modify well or something to that nature. Again thank you all for the input.