pfeife

Somehow i wasn't able to chose the vertical comp as an option in the rifle builder, only tactical or competition. Which one would you guys recommend, vertical or competition?

Mechanical. Thanks for the tip, i´ll try stronger springs.

Is there an easy way to separate the hopper filled with powder from the Powder measure? I have to lock away powder, but don't want to take out the complete Powder measure every time i'm done loading. I'm loading .223 on an Evo Pro, now and then the Powder Drum is stuck in the up position. I tried cleaning and greasing some moving parts (including those O-rings), without success. Where can i find complete disassembly instructions for the Powder Measure? Any help is appreciated!

As mentioned above, the bullet feeder is quite loud. On the bottom half of the bowl i glued in a strip of thin rubber (i cut some old bicycle tube) with two-sided sticky tape, this helps a little against the noise of the bullets falling from the top of the bowl. Also i cut a circle the size of the bowl out of styrofoam with angled edges, so with a little pressure it´s fitting well, also reduces the noise, and you can remove it quickly for new bullets. Hope this helps a little!