Snowgun

I am looking around as well. I'm looking at a comp tac international fitted for an eagle (the bottom is open so the extra length could stick out), a blade tech targetmaster, and also looking at doing a custom with say Weber Tactical.

JP barrels come with a headspaced JP enhanced bolt, which by itself is like $125. They just dont do a good job explaining this on their website. So technically this brings it into the $300 ish range, which is great for the performance you get out of a JP.

So I got to look at this gun at the local shop yesterday, and I noticed it came with three recoil springs. To standard wire coil, and a red flat coil spring. The flat coil spring Felt much stiffer. Is there anywhere that mentions what these various recoil Springs are for?

I found a couple local to me (https://secure.arnzenarms.com/product/grand-power/grand-power-x-calibur-9mm-luger-499-inch-barrel-blue-15-round) was going to go check them out after work today. What is the best place to get spare parts (Trigger return spring, sear, etc) if I want to mess around with the trigger a little? Grand power EU itself?

This stock 3 just went up if anyone is looking http://www.gunbroker.com/Auction/ViewItem.aspx?Item=423994039 How does the 3 compare to the two again? Same barrel length right?

Surface solutions in mn. They don't usually do this on firearm parts but since they were new parts, ( and since I charmed them a little) they hooked me up. Because of the polishing my SA is 2.25 lbs, da 5.5

My Little Project, TiN coated parts on a Shadow. Took some work to get it apart and melt off all the polycoat with naval jelly.

R u illicitly machining parts at work again?

I ordered a bunch of tr springs, along with Cajun gunworks' floating trigger pin. I got the trigger only pull down to 1 lbs from 2.5 lbs, which gave me a final SA of 2.25 lbs. The issue with trigger freeze is interesting, I'll have to check that out. So far it still feels pretty positive.

When I tested just the trs weight it came to about 2.25 lbs. I will have my other springs reduced, but I'd rather not risk light primer strikes if there is weight I can loose in the trs. Good ideas for bending the trs guys, thanks. I've ordered a bunch to try, along with some gear from Cajun gun.

I was talking about just the contribution from the trigger return spring itself to the overall pull. It's about 2lbs right now. I'd assume dropping it to 1 would help me reach 2.75-3lbs overall w/o affecting reset.

ahhh, the old conundrum. Do have a # you suggest? I think I'd be happy w 1lb on the TRS..

Pbrammo.com They even have a brass program, I've used them a lot and they are a+

So I took the frame to my buddy the gunsmith and he had to grind down a standard punch to the metric equivalent and hit the living bejesus out of it. It came out, but even he was impressed at how hard that bad boy was in there. I'll definitely be getting the "easy" pin suggested above (or maybe slightly modify the one that come out... ) I ordered some more trigger springs so I can play with them. I would have just bent the one I have there in-situ but I'm doing some other shenanigans that required the removal of the trigger. Just wait for it buddy, you know its gonna be epic when I'm done.

Hi Guys, I have two simple questions that I can't find the answer to anywhere, and I thought you CZ pros might know: 1. Do they make a reduced power trigger return spring? I would like to lighten up the trigger pull a little more than my 75 shadow came with, and I thought that taking the trigger return spring down a pound (it's at 2.5 lb)would help without dropping the mainspring too much. Does anyone make these? Is it something that I may have to make/hack/bend a reg spring on my own? 2. How do you drift the trigger pin? The CZ shadow comes apart easily, even though there are lots of parts. I noticed that the trigger pin is flared on one side. I have heard that sometimes they are staked? This is a cz 75 shadow (not spo1). The pin is not moving (tapping toward the flare) with relatively decent taps, so I stopped trying till I figure out what the plan is. I know getting them in is a challenge even with a slave pin, but I can't even get mine out... Thanks for any suggestions!