Jump to content
Brian Enos's Forums... Maku mozo!

Mad Doc

Classified
  • Posts

    150
  • Joined

  • Last visited

Everything posted by Mad Doc

  1. I use aeroshell 22 which is a total overkill, my guess is that any grease will work. I agree with zzt be careful opening it because the bearings will fall off, they are easy to put back in place but you don’t want to lose them. I no longer use oil on my handguns, rifles or shotguns I only use aeroshell 22 and never looked back. That’s another controversial topic
  2. I tried mine and there is a significant decrease in felt recoil with no malfunctions. I greased the ball bearings wells and now racks a lot easier.
  3. Comes with a universal adaptor and a picatinny, the universal fits perfectly
  4. Stretch 16 are manufactured by Mcgowen barrels I think.
  5. I'll take the taccom mag extension

  6. It's a new division at superstition mountain 3 gun annual match and Rio Salado monthly matches, the handgun can have optics but most fit in a box with the mag inserted, the shotgun can have optics but the feeding tube can only be certain length usually allowing 10 rounds, no mag fed shotguns etc. it's a fun division!
  7. I like that. Too bad IPSC doesn't have a good Division for it. It's my 3 gun open/stealth division also good for steel matches
  8. SAS wore this in the North African desert
  9. I attached mine to a chest rig. That solved the problem.
  10. Trijicon RMR, leupold deltapoint and the JP red dot come bullet proofed from the factory. I have been using them on slide mounted hand guns and open shotguns without loss of zero or diode failures.
  11. Mine was an XN, I contacted Akdal in Turkey via email requesting to buy a new bolt or extractor. They referred me to T&N as their distributor.
  12. My experience is that they lead the barrel horribly and group poorly in my Versamax
  13. I have a Firebird Tac 12 the quality is superb but the weak link is that still uses a Turkish bolt and bolt carrier. After 2 years of intermittent problems I finally figured out that the malfunctions were related to a very weak extractor spring and a marred plunger. in my opinion the quality of the Turkish parts is subpar and the extractor geometry is inadequate. Once I fixed that the shotgun runs like a sewing machine even with cheap ammo. Last year at RM3g I met Jim, he is a gentleman and overall nice guy I discussed some of my shotgun issues with him, he was not only very helpful but he offered to lend me one of his shotguns for me to complete the match. Fortunately there was no need for that plus I didn't want it to impose. Jim knows the issues with the Turkish parts and he mentioned to me that unfortunately is not economically feasible to manufacture a bolt in the US. The TAC 12 is very easy to disassemble and clean and I am happy with my purchase.
  14. Try a new mag spring from Nordic components and a puff of powdered graphite in the mag tube
  15. Yes, Benelli Chick, JJ and Stealthy Blagga should be the directors and dictators of such governing body.
  16. The delta point base is narrower than the trijicon rmr
  17. I thought you said you will never shoot a tube fed shotgun again! Are you flip flopping? Welcome to stealth!!
×
×
  • Create New...