esweber

Thanks for the info

I like the tikka t-3 but that's just me

I can see where it would be helpful but i am just not setup to take everything i need to the range I try and make a couple different loads and just take them when done we shoot and have fun slow but seems to work ok for me

sierra MatchKing 168 And i did not group them yet was wanting to get in the ballpark first

Working on my first reloads for my 308 first time for rifle Tikka T-3 Barrel 20" 1-11 Brass win. Primer Win lr 44 g varget Shot five rounds 2609,2619,2604,2614 2604 AVG.2610 sd 6 es 15 Not 100% sure what all this means any thoughts good bad what i might try ??

Well been lurking for awhile and decided to take the plunge. Found a tikka with a zeiss conquest scope not top of the line but not bottom . Now to start reloading, and try and shoot as good as i hope the rifle can. Would like to get another stock for it but will use it as is for this year. Just trying to learn the ins and out of long rang

Yes the first rounds of your own a great feeling i get it every time i change something new bullet powder whatever have fun and be safe

Welcome and you can send some of your whether up here

Good to have you back have fun

welcome

Good to have you here

Good to have you aboard

Welcome lots of good info here

Directions says it has a set screw but not one there can i get just the set screw or will i need a new sight?

No set screw guess i am going to have to send it in

That may be the case just tried the old sight and it will not slid in but are the sights still be able to be used since it is so loose now? It takes no pressure to slid it all the way in now. And red lock tight seems like for the money should have s better fit

Got Dawson sights in about 2 months ago for my xdm 9 had my local gun smith installed them for me rear sight looked like he used glue to hold it on. Did not think much of it at the time but it fell off the other day i can slid the rear sight in and out by hand. WTH did he do?

Just wanting to check this out I am going to load up some mg 147 cmj using vv n320 will start out with 3.3 gr, oal of 1.115 give or take mixed brass wsp primers shooting out of a xdm 4.5 no mods done to gun Tried the search but was coming up with so much thought i would just ask thanks

thanks What type of hold do you usually use? Some people are used to a bullseye hold where they'll place the bull on top of the sights or cut the bull in half with the top of the front sight blade. Most Sigs are "combat sighted", for which you align the top of the front and rear sights but hold the front dot over the bull. If you are holding the dot over the bull, then you may need to swap the front sight out, as Sig has suggested.

Just like the title says bought it new for the wife she was complaining she had to aim high to hit the bulls-eye so i shoot it a few times and the same with me shoot low thought may be the way we where shooting, so had a friend shoot it and the same Seems to shoot 3"to 4" low at 7 yards give or take a yard any thoughts? Talk to Sig they said i need to change the front sight to a #9 which should drop it to where we want

Yes she had a 22 that she has been shooting lol was hoping she would not like the 9 so i could take it over but it was not to be she loves it no love for me o well if shes happy that is good it seems to run down hill ha ha If she's a beginning shooter? I'd start with a .22 and especially if you're going to be shooting indoors during the Winter. Then work up to a very light 9mm load outdoors.

All good info i wasn't thinking of buying new it was just for the ones that just kinda show up thanks all

Ok got my wife to want to go shooting with me [get the wife in pocket book opens up] We have bought a sig 2022 9 mm for her to shoot. I have been doing some research on loads and this is what i am thanking 147cmj with 3.2 grains titegroup only because that is what i have the most of also have bullseye and unique. She is just going to do some target right now but might go to a few idpa with me when we get the chance any thoughts are more then welcome Thank you all in advance this sit has been more then helpful

Ok so other then they might not last as long every thing is the same that's what i was wandering thanks

What are the difference in the reloading of Brass and NICKEL ? Is one better then the other or what