Jump to content
Brian Enos's Forums... Maku mozo!

himurax13

Classifieds
  • Posts

    1,317
  • Joined

  • Last visited

Everything posted by himurax13

  1. If you count the top and bottom coils, I see 13 on the left and 11 on the right.
  2. I can't reiteratte this enough. Especially for the Tanfoglio and CZ-75 platforms.
  3. These have caused case head seperation in PCC's. I suspect they would do the same with 9mm Major.
  4. They would fit just fine in Limited or limited 10 minor. It would take more money than the retail value of these guns to make them into competitive open guns. These guns should be compatible with many Tanfoglio parts. I suspect Tanfoglio double action parts could be made to work but that won't allow it to be used in Production or Carry Optics.
  5. I use a circular tupperware bowl and I shake vigourously after spraying.
  6. You could try Titegroup, N320, SW Clean Shot, or Win 231. They would feel similar compared to what you are using now.
  7. Hopefully you can seat those Ginex primers deep. They seem to have light primer strike issues with them.
  8. This is a great point. 3.8g of Titegroup/Clean Shot behind a 124g will get me 130ish PF out of most of my Production/Carry optic guns.
  9. I use the 124g 9mm in my open gun at 172 PF...
  10. The Ginex primers that I have used seem to cause light primer strikes in Sig P320, CZ75, and my DA/SA Tanfoglios.
  11. I had J and L gunsmithing install Dawson Fiber Optic sights on some of my older slides. https://www.jandlgunsmithing.com/
  12. I reccomend using a large white terry cloth towel when dissasembling the mag release. The pin can be easily lost.
  13. I use the .40 caliber ones for my Large Frame Limited Tanfos.
  14. Is it possible to add a thigh pad to a DAA race master holster?
  15. It does interfere with the FM9 lower but works just fine with the Aero lower. LRBHO and short stroke work perfectly with an Aero Upper and lower with the Taccom ESSB and superfeed barrels.
  16. I was looking at 3 different kynshot buffers and I was trying to figure out the best way to test what is best for double tapping with a 10" barrel and 6" brake (100g & 115g) and a 5.5" barrel and brake (124g & 147). Sumply watching the dot bounce is difficult to judge. 1. 5015, Orange Spring, and buffer tube spacer. 2. 5020, Red Spring, buffer tube spacer, A5 tube. 3. 5006, JP Polished Carbine Spring, buffer tube A5 Tube.
  17. You will need to go to an online vendor such a Cajun Gunworks, CZ Customs, Patriot Defense, or Wolff Springs to get a larger variety. The ammo you use will determine what spring you will need.
  18. I found this data online, however I would probably start at 4.2g
  19. Has anyone used the .380 95 grain double struck heavy plated bullets for PCC? Were you able to make PF? What OAL did you use. Thanks in advance.
  20. Should be similar to Tg. I would start at 4.3g. A lot depends on the barrel.
×
×
  • Create New...