burket

I reloaded and have several months, then keep it current as I shoot. So I reloaded several thousand, and now only a couple hundred after i go to the range.

I have been using HP38 / Win231 for several years. I know of NO temperature sensitivity. BUT there have been letters published (reportedly from Hogdon) that HP-38 / Win231 is being dropped from production in the next few years. I have seen the letters, but I have no idea how accurate / reliable these stories are. I continue to use this powder. Best wishes.

Does anyone know when we might see that powder in the stores? I've been missing it for more than 9 months.

Sorry about that - Xtr 100gr RNFP. I also use 3.2 gr for MG 95 gr JHP at COAL 0.95. Wish i could find some (a lot) of HP 38!

HP38 3.3 gr 0.95 COAL Winchester SP mixed range brass Problem currently is I can't find HP38 / WIN 231 powder, anymore!

Hell, it's a Dillon, Just call them and ask for the pins you need.

Following this. I am also VERY interested in HP38 powder!

Not sure what you are asking, as .95 is SLIGHTLY shorter than .984. And Yes, I am sure of my OAL. Not sure what salami has to do with it? Unless you mean SAAMI. probably. OK.

I use a 550. I have MG 95gr JHP, and HP38/Win231. I load 3.0gr at .95 OAL. This doesn't exactly answer your question, but hope it helps. I'm also loading for a G42. Best Wishes!

I've not been able to see / get any HP38 / Win 231 for a couple of years. Now I need some. Hope your comments (ref maybe this spring!) are correct.

ES13RavenIf I may assume you are using a 550, I had that problem, and it was because the shell plate needed to be tightened. You need to be careful, as you can tighten it so far, as to be unable to rotate it, so be careful! Best wishes.

I've used those a couple times, but never bought them. I just sort the (up to) several hundred cases immediately after my range time. And I just go thru them by hand. It takes maybe 15-30 minutes. Hope that helps.

ES13Raven I also use crushed walnut. I usually run several thousand 9MM or 40S&W brass thru it, in several different loads. Usually about 500-1000 pieces of brass at a time. The crushed walnut may last 3-5 times. When it is discolored (based on looking at new crushed walnut), I toss it. I use new dryer sheets, as I don't use them in a dryer at all. I throw them away when they have picked up a lot of dust! usually about as long as the crushed walnut lasts. And I don't use any additive, but I also don't care about shiny brass, just clean! Hope this helps!

surgdogI just recently bought an RT1200 from Brian Enos (Dillon), and it had the blade present in the body. I would guess that yours does also. Best wishes.

Yes this correct # = lbs Good luck

Nely Standard 9mm Luger Grams Oz each piece 9mm, 59.46gr/ea, 117.7cases/# 8.5#/1000 3.8535 0.13593 Hope that helps.

ams30gts I am assuming a Dillion 550/650? Possibly look at tightening your shell plate. Be careful to allow it to move (index), but maybe it is too easy to move? Good luck

Yeah, I'd like to know the same thing. I keep looking at Powder Valley, and Gunbot. Can't find any anywhere!

trlloydIf you can get to the west side of Denver (US285 and Wadsworth- approx) Green Mountain Guns has some TrailBoss, and a (very) few others. Or did last week! But NO HP38 / Win231. I am looking for those as well. Best wishes.

I have a CT laser on my EDC (G17), and a different CT laser on my G22 Gen 4. Both of these are the buttstock version of the CT laser. I had a problem with the laser on the G17 failing to turn on, about 6 month after I bought it. CT had me ship it back to them. I don't know if they repaired it, or replaced it, but I had it back in less than 2 weeks (no Charge, except one way shipping). I have had both of these lasers for over 2 years now, and had NO other problems. I shoot multiple times a month. I also have a CT laser on my new G42. It sits forward of the trigger, under the barrel. And I have had no problem with it either. (Of course, I've only had it about a month!). I like the CT lasers!

7000/115 = 60.87 bullets / lb? * 7.5 lbs = 450+ bullets?

G34 Gen 3 - MG 124 JHP - HP38 4.4. I actually shot Limited, not production, but this also gets about 130PF. I also shoot this load in my G17 for practice. Hope this helps.

I use MG 124 JHP over 4.4 Win 231 (HP-38) at OAL 1.122. Wish you the best. You should take a look at several loader's manuals, and start low, then work up.

Yesh, that's my question. I've used over 40,000 over several years, and have not had a problem!

Jromanowski 2 possibles. 1) load your mag with the slide on your weapon locked open, or 2) load the mags with 14 (-1) rounds. I haven't had that problem, though, with my G22. I also use Dawson (and Arendondo) mag extensions with no problems.