JDubb

Last year when we had a ghost squad I was able to go check out the vendors in the middle. I was A2 last year, and middle of upper C this year. I didn’t have time to check out what was there this year. It is what it is giving my time to work it.

They wanted us to split the squad on the dual stage bays. Kinda hard with 8 people to do that… in honesty there wasn’t much thought process when it comes to staff day. You get burnt out in the first day and wish it was over already…

Staff day was way to long……. I worked stage 12 that match it gave plenty of options and you had to go left and right starting in the center.

I’m using 3n37 for my loads now. I’ll be trying some #9 when I find some for testing. im using hornady 180xtp bullets 8.0 3n37 at 1.260 oal. I loaded some lpp and spp so far. chrono was averaging 1,087fps. Hope this helps in anyway!

I use 3.9 titegroup at 1.140 oal in two glock 34’s. I used Montana gold 124 fmj rn. bullets. mixed brass and win spp I was at 132-133 power factor

I have used these before and worked perfectly in a Glock 34. I also have used the 40 180 grain as well!

All you have to do is ask. They have others available

Sns has all colors.

Yes it’s the Caldwell app !

Here’s the 1.145 oal load I ran across the chrono

I run my 135’s to 1.140 in a gen 3 Glock 34.

I made some with this powder at 3.5 under a sns 135 bullet at 1.120 oal. The second batch was at 1.145 oal I will chrono tomorrow these will be for a Glock 34 gen 3 running a vortex viper red dot. Thanks for all the good info on this thread I’ll post my results tomorrow

3.0 titegroup under a 147 sns at 1.140 oal 3.2 titegroup under a 135 sns at same length both 130-132 power factor These were shot out of Glock 34,xd9 4” and a shield 9mm

4.2 titegroup under sns 180 tc mixed brass 1.165 oal out of my edge is 174pf. Same load out of sti trojan and a custom ss guns is 176pf

Ryan and Kyle thanks for all the behind the scenes work for this match!

I use 4.4 grains of titegroup at 1.185 oal mixed brass out of a sti edge. had to bump it up to 4.85grains of hp38 at 1.185 oal used hp38 when I couldn’t find titegroup

I used 4.3 at 1.185 oal with berry hp. Sti edge

4.9 HP-38 at 1.180 oal sns 180 grain bullet 170pf out of my edge last 3 years at majors.

Fordshooters.com Gavin Ford!

I cleaned mine really good and after 400rds today it was back. Everything measures out good on length and crimp.

I shot this load today 4.2gr solo 1000 230 sns moly bullet win lpp mixed brass out of 1911 Lo 734.8 Hi 755.8 Ave 745.9 Es 21.02 SD 7.54

Instead of using the design of those plates mini poppers would have been better. It was a very good stage. Just my .02

One call to sns castings they will take care of you!

Mailed my app out will be delayed for the holiday and reserved a room! Sent a pm to cvasilion!

Last years indiana state match load was 180gr berry's HP tula spp mixed brass cases 1.185oal 4.5gr of titegroup 165.3 PF