Jump to content
Brian Enos's Forums... Maku mozo!

748r_bb155

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by 748r_bb155

  1. Check the Hole in the firing stop plate for burrs.
  2. What capasity did you end up with, with the TTI 3mm ? 28 ? probably need to order afew myself.
  3. What is the lenght without baspad ? but the tube in the ipsc mag gauge and use some china to se what thikness is Max. have a few of these tubes as well. Was planing to test the SVI baspads. But not in stock, complete svi magasines was so I ended up with a few of these as well. dont have a ipsc mag gauge. possible that you Check.
  4. Check that the extracor is not hitting the barrel. will cause them to break.
  5. 9x23win (9mm super comp) 180 pf. 4 port hybricomp barrel with mclearn comp 3 up 2 side ports.
  6. the mag is pressing on the mag release, pushing it forward. The overtravel screw bottoms out on the mag relase. So the overtravel stopp will engage the trigger bow to eary and you will not be able to pull the trigger all the way back. back off the overtravel screw and iy should work. What causes this is probably the slot (size or shape)in the magazine for the mag relase. had the same problem with sps 29 round magazine. Opend up the mag slot a little and backed out the overtravel screw on the trigger bow. eo
  7. Talked to a Dealer here in Norway, they stated that c-more would come out with an updated RTS, In March the were told that the new sight would be out this fall. Anyone heard of this. Bigger lense, and manual intensity adjustment 6 MOA dot, were some of the features. EO
  8. Case lenght is the same 22.86 max(off my head) mm (metric)22.66 measered statline 9mm supercomp I have had barrels cut with : - 38. super using .38 super nonte (clymer) reamer. - 9x23 Nowlin(Clymer) - 38.Super JGS reamer (Think I custom orders it with tighter dimension, to long ago to remember). Both chamers are tapered. (looked at both reamer designs (9x23 and 38.super Nonte) from Clymer Tool they where available at their website and basicly the 9x23 was a "tad" wider at the base) I use the 38.Super reamer from JGS for my 9x23. (tighter chamer as the 9x23 from Clymer was a litle sloppy). Only problem I have is if someone with a 38.super shoots my 9x23 brass (with their sloppy 38.super chambers) and I reload the brass the round will not camber in my guns as as the lyman 9x23 sizing does not size the cartigde all the way down. (Lyman 9x23 sizing diw is designed that way). (running the brass througt a 38.super sizing die will solve the wide base). I'will stick to 9x23 brass (even touth they are more expensive here in Norway EO
×
×
  • Create New...