cgrivois

We've been having heated discussions lately while setting up for matches regarding fault lines and targets. There are times when if you crowd the fault line, or use long cover on the fault line, you can clearly see and engage all the targets without changing your body position. The question is can / should a PE be issued for exposing yourself to unengaged targets if you set up in this way? We used to call it busting cover, but since there are no longer cover calls with the use of fault lines, the line of thought is now your exposing yourself to targets. Our MD has said that the intent of fault lines was not to stop using cover, which to a point I agree with him.

What am I overlooking here. Stock glock sights are .256 rear, and .165 front. The stock rear is pretty clost to the V rear sight, however the V front sight is a bit taller than stock glock but yet most seem to think the V sights shoot high. Seems with the taller front site POI would be lower.

Just installed it last night so I havnt run any rounds through it. I hope to tonight. Sent from my SCH-I535 using Tapatalk 4

Problem solved. Sent from my SCH-I535 using Tapatalk 4

Is there a way to temperarly stop the cases from feeding into the shell plate? If I only load 100 primers and happen to put in 110 cases in, I would like to be able to stop the cases from feeding when I run out of primers.

So because the first shot is double, the following shots do not matter? Thanks.

I thought SSP guns have to be double action only. If they start hammer down on the 92, wouldnt only the first round be double action, all rounds after that would be single correct.

Gun will not run at minor 125 pf, 3.9 gets me roughly 135 pf at which point it runs flawlessly. My numbers do not match others shooting same model gun and same round recipe, suppose I have a slow barrel.

I've got the phone app but in order to pick it up I've got to set the sensitivity so high that it picks up other noises as well. Ill work with it some more and try to dial it in

Will a shot timer pick up dry firing in a garage? Looking at the Pocket Pro 2.

I run 3.9 gr of N320 with a 180gr Precision Delta Full Metal Jacket, OAL 1.125 from a G35. I read some people making minor with 3.6 gr of N320 out of G35 but mine will not do it, wont even cycle reliably. 3.9 gets me at about 130-135PF.

Installed mine the other day and it did feel gritty just as the trigger broke. After dry firing for a while is smoothed out.

Yup just ordered one last night and got the confirmation that its on its way.

Im using N320 over 180gr PD bullet in a G35. Anything below 130pf and I seem to have issues. Im using an 11lbd main spring. My current load is 3.9 gr. I got chronoed at a major last month and was running 4.0 gr, chronoed at 135ish.

Ive never had to show my card at a major. I think they will check your IDPA member number when you sign up, they will see your classification then. See you at the cup.