GOF
-
Posts
1,261 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by GOF
-
-
For older shooters that can no longer see iron sights quickly or in focus- consider this.
I'm assuming that those shooters wear prescription eyeglasses, and that the focus length is set for the standard 20-foot for distance vision glasses. But, the focus point on eye glasses can be set for any distance by the optical techs. All you have to do it ask.
My 'iron sight' glasses are the same prescription as my regular distance glasses, but the focus distance it set for 25-inches. The sights are sharp and clear, and I can even read a license plate at 13-yards. The targets are slightly, but not overly, blurred. But do you really need the target to be in sharp focus? Put focused sights on a slightly blurred target and you get a hit. Put blurry sights on a focused target and you get a miss.
I made IDPA SSP MA & Bug, and EX in SSR, ESP, CDP and Steel Challenge A Class in RFPI and RFRI with those glasses.
-
On 10/15/2023 at 9:07 AM, Bhayden said:
No, with EDC, I want the least amount of things that can go wrong. A dot is just something else that can fail.
A big +1. Iron sights are always there. Dots, as any competitor (including myself) can tell you they will fail at times. The very vast percentage of self-defense situations occur at closer ranges. Sometimes even close enough that just looking over the top of the pistol is enough. I won't go into my 10-year military service much of it in the far east, but I've BTDT twice. I didn't wish I'd had a red dot. I do shoot one in competition, but if it fails I'm just out of a decent score. If it fails in personal protection I'm out much more. I'll stick with irons. They always work.
-
Has anyone noticed an increase, or a decrease, in IDPA participation in their area?
-
Is there a point to this?
-
18 minutes ago, Hoops said:
I agree. FL is a perfect place for SC and it appears they have very good ranges and MD’s.
I probably should have been a bit clearer relative to the Top 20 subject line. In this case, I was talking about the Top 20 people by division and class that SC updates on their website weekly.
my thinking was that it was expanded to Top 100, perhaps it would provide more people to see where they rank across the country.
I had suggested previously that SCSA.org might consider showing every member where they rank by division and class.
For example: let’s say there are 2,500 A-class RFRO shooters. If a shooter is in 250 th place nationally, beside their class would be A (250/2500). I personally would find this interesting to know.
lastly, in the current Top 20, GM’s are capped at 100% and should be their actual percentage.
thanks
That's not a bad idea. It would be interesting.
-
Stop and think for a minute. The two top clubs (Volusia and Flagler) in terms of matches held and classifiers run are located in a 'retiree rich' area of Florida. They can run weekday matches, and weekend matches.
There are a lot of elderly shooters who have been active competitors in USPSA, IDPA, ICORE, but due to age are no longer are able to run full speed in those games. SCSA allows them to still compete, and have fun while doing it. I know for a fact that some of those weekday matches are as much a social event as
competitive event. And there's a bunch of A, M, and GM class shooters showing up for those. What's wrong with that?
SCSA is also a great way to introduce young shooters to competitive shooting.
It's not hard to see why Steel Challenge is increasing in popularity.
-
On 10/27/2023 at 10:04 PM, Runswithwood1 said:
Thus far I like the center dot with 8 moa circle turned up nice and bright so it almost blends together. Havent had a chance to do much shooting as of yet but I'm pretty optimistic about the 507 comp doing what it does
I'll second that! I shoot a lot of steel chalenge and the 8 MOA circle dot looks just like a 8 MOA dot. It's been perfect for me.
-
56 minutes ago, konkapot said:
Short notice change to open. No real time to work up a legit load, so I purchase some factory 38SC from a well known company in this community.
Ammo makes 170pf; not optimal, but workable. Gun feels great.
However....at 25 yds I can do fist sized bill drills all day long, but some of the bullet holes in the new target are not quite circular. Not flaming tumble holes that are twice the size of the round, but definitely not clean holes. Out of a 12 shot "group" 3-4 of them are 150% bigger than they should be.
Comp looks fine; no signs of bullet strikes but will check further today.
Cause? Concern?
If the groups are good, I wouldn't worry. Those bigger holes might even get you a liner or two
-
On 9/10/2023 at 1:17 AM, JTWjr said:
I put a 507 comp on my 929. I had an rmr04 on it previously.
The 507comp is so much nicer.
I'll second that. My 507 comp (green dot) is great and uses the RMR footprint.
-
On 5/21/2023 at 2:11 PM, Vic said:
I've used DG ( Damn Good Bullets) for many years, great prices, always in stock, and never experienced any bullet creep in either 38 special or 38 SC.
I'll second that in 38 SPL, 38 Long Colt, and 9mm, and I use a taper crimp for each.
-
22 hours ago, dmshozer1 said:
The contact # for warranty returns goes directly to a medical alert message.
I emailed them and they said to go to this number?
Anyone know a different way to contact them?
Thanks
Try this. Google Bushnell Optics. Scroll to the bottom and find phone# for Contact Us. Call that and ask for customer service.
-
On 9/3/2023 at 9:42 AM, Dirty_J said:
Yet another RO that doesn’t know what he’s talking about. Shocking.
is 100% not an issue to do this.
What? You mean they have those ROs who don't understand common sense?
-
7 minutes ago, zzt said:
This^^^^^. Even if you zero from a rest, you still have to shoot freestyle. Believe me. I coach enough people to know POI isn't always the same. One guy in particular dumps the trigger. He is going to shoot under no matter what. He can't seem to cure the problem, so he sights in to compensate for the problem. Nothing wrong with that. The idea is to hit what you aim at.
How you shoot from a rest also makes a big difference. For competition shooting, standing with your wrists on a rest is closest to freestyle. If any part of the gun is on the rest, there will be a difference between the two.
Excellent advice! Dead on the money.
-
3 hours ago, zzt said:
Use a ballistics calculator. I sight all my Open guns at 25 yards. At 1525fps, POI would be too high at distance if I sighted in closer. Most of my other guns are sighted in at 25 yards.
+ 1. 25-yards is perfect for USPSA/SCSA, ICORE, IDPA, regardless of what gun & load you're using.
-
Forget the comp at sub-minor velocities. It's just a 'hood ornament' at those velocities, and only the front barrel weight of the comp will have any effect on recoil. Fast powders are the best bet for sub-minor 9mm.
N310 is my favorite. I use 3.1 grains with a 125-grain coated lead bullet (about 940 fps from a five-inch barrel). 231/HP38 will also work. The key is to load as light as you can while still getting 100% reliable ejection. FTEs tend to really screw up a string. You can live with one... but not two.
-
On 8/4/2023 at 1:11 PM, motosapiens said:
all you have to do is go to one of the 'other organizations' matches and get screwed over on a bogus rules call to appreciate uspsa. Not really a big deal i guess for people who aren't competitive and just shoot to have fun and make noise, and don't want to shoot major matches with a reasonably consistently applied ruleset and stage design criteria.
You can get screwed over on bogus calls in USPSA too. BTDT
-
On 6/13/2023 at 10:25 PM, Squirrel45 said:
Hi guys
Im just about out of 8#s of ramshot competition that I have used in 9mm with 100g projectiles. I was wondering if anyone has used N310 or titewad for light 9s. These loads do not need to make pf.
Thanks
I have used N310 with 125 coated lead. 3.3 gets about 950 fps, 3.5 gets about 1050 fps. My 5-inch M&P CORE handles both, but some other guns I've tried it in won't eject it reliably.
-
I have one on my Steel Challenge RFRO (A Class). I love that big dot! I have had the sight for about 6 months with no issues. The (I think it's 11 MOA) dot only covers a bit less that 3 inches at 25 yards, so it's not as big as it may sound. But a 3 MOA dot only covers 3/4 inches at 25 yards. It works for me.
-
On 1/18/2023 at 10:14 PM, OPENB said:
I think the it’s a big whiff on the reticles. 2moa dot is way too small for the majority of USPSA shooting, and the circles are useless to me. The video they are talking about 50 and 100 yards. Not in this game. And 2moa is the size of dot Aimpoint puts in the T2, a rifle optic. I’d like a 5moa dot in green, please!
A Big Plus 1. 2 MOA is fine for a long gun but useless for an action pistol. A 5 and 8 moa dot would be much more effective. As for the circle reticles, maybe on High Power Rifle, but useless on a pistol. I'll stick with my Trijicons.
On 1/18/2023 at 10:14 PM, OPENB said:I think the it’s a big whiff on the reticles. 2moa dot is way too small for the majority of USPSA shooting, and the circles are useless to me. The video they are talking about 50 and 100 yards. Not in this game. And 2moa is the size of dot Aimpoint puts in the T2, a rifle optic. I’d like a 5moa dot in green, please!
-
JMP was not only a legend in the action shooting sports, but he cheerfully passed his knowledge along to other shooters. He gave back to the sport that made him and helped many others achieve success. He will be missed.
-
20 hours ago, BritinUSA said:
If 'common courtesy' were still common then there would be no problem.
+1! Respecting the other shooters, and not interfering with them, should be a normal part of any match.
-
1 hour ago, barry said:
Ro should have control of environment. That being said it's not golf and you do have gunfire from surrounding pits .
If someone is carrying on loudly behind you ask ro to addresses it
+1. If the spectators behind you are interfering with your pre-stage procedures tell the RO. Ask him to quiet them down. Interfering with a competitor, whether by intent or just through impolite behavior, should not be tolerated, and the RO should correct it. That's their job.
-
A laser that can be turned on and turned off is an asset on a PCC. For stages where you have a clean sight picture on the targets the entire time, just turn it off. In the start position of a stage that has hard leans -or maybe a hip shot first target - turn it on. Grean is better than red. Stick it on the forward rail under the barrel, zero at 10 yards (late evening or on indoor range) and you have an asset that can make life easier on crappy stages. When it's not needed, just turn it off.
-
It sounds like a too-light taper crimp that is allowing bullets to 'prairie dog' under recoil. Recoil in a handgun isn't unlike an inertia bullet puller. Bang/bang/bang/bang -- creep out/creep out.
It's a known problem in lightweight compact revolvers chambered for .357 mag.
Tightening down on your crimp should solve it.
SCSA - Limited Optics
in Steel Challenge
Posted
That's my opinion as well. What is the practical difference between CO and LO in Steel Challenge? There is none.