Jump to content
Brian Enos's Forums... Maku mozo!

nhjeffs

Classified
  • Posts

    100
  • Joined

  • Last visited

Everything posted by nhjeffs

  1. I've always heard that but i have placed multiple orders and have never had a problem.
  2. I've always found them cheap at Botach Tactical. $25 right now.
  3. The 10 round magazine has no effect on the size of the pistol. Same gun, just a limited number of rounds in the magazine. As stated above, if you are not in a state that has banned high capacity magazines, buy the pistol with the 17 round magazine.
  4. I found this pic online. Newer failsafe on the left, old style on the right. Old style used springs to return the charge bar.
  5. I had the same break on the old style measure. The person at Dillon said it's not unusual.
  6. Got it roughed in. Rounds slip out of the case gauge nicely. Now I need to set up the powder drop and clean the work bench up.
  7. A local Dillon dealer called today to let me know the 650 I ordered was in. I can't wait to pick it up Friday and get it running this weekend.
  8. Thanks. I have one more match and then it's going out to get hard chromed. Sent from my Nexus 5X using Tapatalk
  9. I need to send my S3 out to get refinished. Do you just get the frame and slide done or do you have all the parts refinished?
  10. S&W makes one in 4.25". https://www.budsgunshop.com/catalog/mobile/product/61701/redirect Sent from my Nexus 5X using Tapatalk
  11. Give Doug a call. http://ateiguns.com/ Does fantastic work on M&P's. Sent from my Nexus 5X using Tapatalk
  12. Do the Stock 2, Stock 3, and Lim Pro in 9mm all share the same magazines? I have the 3 but would like to try one of the other as long as they use the same mags.
  13. I had the front leg on the ejector break on my Range Officer. If the pin will spin in the hole try a rare earth magnet to pull it out. I tried a bunch of different things with no luck. I happened to have one of these from a goody bag and it pulled the broken leg right out of the frame. https://jet.com/product/detail/739b1c127d9f43ef869834effc43bb46?jcmp=pla:ggl:home_garden_a3:business_home_security_security_safe_accessories_a3_other:na:na:na:na:na:2&code=PLA15&k_clickid=f0c1c14f-033e-447d-9c63-85e72301dcd1&abkId=403-484491&gclid=CjwKEAiAi4a2BRCu_eXo3O_k3hUSJABmN9N1FYYb_L0tDKYOkycUq6T1J_rrs-NZDqhTOwy99ClE1hoCVAHw_wcB
  14. I use these. They work great. http://www.amazon.com/Gun-Storage-Solutions-Starter-19-Inch/dp/B00570T3R4
  15. nhjeffs

    Stock 3's

    How great would it be to see Xtremes in stock?
  16. Odds are you rounded the Allen wrench. Grind the end down, make the wrench a little shorter, to get some fresh edges on it.
  17. One of the EG grips that I put on my Stock 3 needed the hole opened up also.
  18. I ordered some 147 flat point bullets today. I was wondering if anyone was running them in their Tanfos and how they shoot. This will be my first time trying coated bullets.
  19. When I first installed the one piece sear and an Extreme firing pin , the original firing pin block worked fine. The last few times that I have checked it, the pin would pass the block. Tonight the original firing pin block measured .494". The extended firing pin block measured .508" and is stopping the pin.
  20. nhjeffs

    Sig P320

    Mine was gone from 3/24 to 6/25.
  21. nhjeffs

    Sig P320

    I picked up my Sig. When I sent it away it was showing between 7.5 to 8 lb pull. It is pulling at 3.5lbs after being worked over by Grayguns. Huge improvement while dryfiring.
×
×
  • Create New...