Jump to content
Brian Enos's Forums... Maku mozo!

poopshooter

Unclassified
  • Posts

    0
  • Joined

  • Last visited

Everything posted by poopshooter

  1. poopshooter

    CZ breechface

    is this wear normal? i think it may be leading to extraction/ejection problems im looking at the side of the breechface oposite the extractor hook
  2. when i got the gun the pin block safety was stuck in the depressed possition i have tried poking back out thru the pin channel with a very small stiff wire but it will only drop down less than a 16th whne i try to get needle nose on the extruding nub well its just not quite enough material to get a tug anyone seen this or have an idea that may help me get it fixed? thanks -Craig
  3. 147 grain ibejiheads.com 3.3 grains of N320 I tried all the different weights and settled on these, I’ve burned about 30k with great satisfaction
  4. ya that, or your a pussy. one of the two.
  5. cant wait to see that bad boy in person, looks good.
  6. i know a 9mm afc will load a .40, but your orig post has it the other way...not so sure...
  7. Hoppes is your friend! Saves them factory mags too. They tend to get the speckles if you dont keep um wiped down.
  8. humm...where is my mag gauge...
  9. poopshooter

    CZ 75 Magwell

    anyone know if there is a us source for this smaller style 75/sp01 magwell that they sell in europe?
  10. I'm shooting on Saturday, anyone driving down from the New England area that may have room for a hitchhiker with gas money? private message me if you may be able to help me keep from having to withdraw. Lost my way down
  11. Hey guys, I’m aware that if i try this i will take a hit in round count. but I’m going to do it anyway for continuity. What combination of magazines, extended pads and guts do you recommend for getting capacity and reliability in my SMALL FRAME CZ 75. i will be merging a shadow and 75b sa .40 to get the set up as it will run in Lim.
  12. what do you think would happen with a can of spray silicone from the hardware store?
  13. im getting a new mag relase i think mine is wearing out already.
  14. btw i shot 9+1 for the whole match because that is the only way I can get the 10 rnd mags to seat.
  15. Can someone who has a good scale and the items please post me the weights they get for the "blue follower" 17 round mecgar mags and also the 10 rd cz factory mags. I have reached a high point of desperation with the 10 rounders for idpa. Watch this Video for some comical stuff. I am well aware that a real "tap rack bang" would have solved the first mess...
  16. I hate seeing my bullets when i shoot, very destracting.
  17. I never would have thought it possible but i witnessed it myself, we used a double chrono set up in tandem. I shoot 3.0g N320 under Bayou 160g and it gets 132 pf pretty consistently in my CZ. Buddy had complained about them being flippy and stout in his G34, so we set up for the testing at a local range. The loads chronoed a tad higher than usual from my CZ, maybe due to the 20f temp, but nothing worth noting. Sure enough, they pushed 137-138 from his glock. I had asked him to bring his old factory load for comparison testing. Its a Fiocci 158 fmj that chronoed like 130 pf at NE regionals and A8 champs. His Fioccis chronoed hotter than my loads, he was like WTF. Well he was running a 20# spring that he thought would reduce his recoil. It replaced the stock spring a few weeks ago and was the only nonfactory spring he had used in the gun. We tried another guys 14# assembly just to test the feel with a spring closer to the weight he should be using (has 15# on order now after talking to some of us). The load felt completely different, much softer. OK, no biggie, proper springing is important for the pulse and cycle of the gun, but rechrono for kicks...70 fps less on average over 10 shot strings. Same result for the fioccis. My only thought is that the 20# was just way to heavy, to the point of giving the gun a full blown bolt action effect. Someone else must have seen something like this in a glock...or maybe not many people have ever fitted up a 9mm glock shooting minor loads with a 20# spring.
  18. Rob at CZ Custom told me it fits in the box, almost certainly gonna replace my sp01 shadow when its approved for both games.
  19. Can anyone tell me if this baseplate will work on this magazine? http://gregcotellc.com/cart/index.php?main_page=product_info&cPath=97_130&products_id=591&zenid=d7618e2b32951446524a25e5141edd33 http://czcustom.com/cz75flatalbasepad.aspx thanks
  20. Yamalink, what weight recoil spring are you running in that gun? if you havent chnaged it yet, you must try the 11 and 10 # springs with Bayou 147g and 160g. those 2 bullets can be loaded long in my sp01 shadow. once you get the spring to match the load, the sluggish is gone and all your left with is fast cycling flat as it gets w/o comp pistol.
  21. my double duty sp01 shadow for ssp and production. Note the slim controls, shaved some weight and now my support hand doesnt get jabbed by the slide stop or saftey.
  22. poopshooter

    New springs

    pistol fired 150 rounds flawlessly, no lite strikes on a mix of Federal and Winchester primers. was testing my bounds. Guess i could go lighter if i wanted to lol. No way, love the trigger as is and looks like the reliability will hold up.
  23. i did a bunch of cz testing with the bayous recently. was an sp01 shadow tho. big fan of the 160s with n320 http://www.brianenos.com/forums/index.php?showtopic=140300&st=0&p=1577625&fromsearch=1entry1577625
×
×
  • Create New...