nbraybrook

Awe man I missed it! Just ordered 2 mags and new match sights

Will this work in a witness elite match?? http://czcustom.com/czlongpolyguiderodandspring.aspx

I was told at a major idpa match that the cr speed double pouches are not legal in idpa Smo11 do you have a model number or anything, I looked on their site but couldnt find anything that said it would work with eaa large frame mags

Those are the houge wrap arounds for cz models. Its a tight fit, but they do fit!

Looking for a good double mag pouch for the witness elite match mags, something that is ok for idpa. Anyone have any recommendations??

I just replaced my sear and hammer with stock parts for my match. The only reason I did not go to the EGW sear is because it disables the firing pin block, and I plan to use this gun for IDPA and firing pin block removal is not allowed. Just something to think about.

Heavier?! What the heck!! Dang it, looks like frame work might be the only way...

Is your the model with the rail??

I was thinking about that, but I would, if possible like to avoid modifying the frame in any permanent way.

Does anyone have any of the new 9mm Mec-Gar mags for a large frame (elite match?) Would you mind throwing them on the scale and telling me the weight? I am getting 3.7oz for my stock old orange style mag. I am trying to get this thing IDPA ESP legal. With aluminum guide rod and houge grips I am getting 43.3oz with old style empty mag. .3oz OVER THE DANG LIMIT! So im right there! I am hoping the new mags will weigh .3 oz less than the old.. Also does anyone have hennings aluminum grips for the match, could I get a weight on those also? Thanks!

I have a single action and I dropped a new factory sear in, it required some adjustment on the bottom sear leg to get the gun to function properly with hammer resets and trigger pulling. Might be the same issue your having, ALSO, the new sear they sent would not engage the safety properly so you could actually still drop the hammer with the safety on. I would check yours also!!

Does anyone have any of the new 9mm Mec-Gar mags for a large frame (elite match?) Would you mind throwing them on the scale and telling me the weight? I am getting 3.7oz for my stock old orange style mag. I am trying to get this thing IDPA ESP legal. With aluminum guide rod and houge grips I am getting 43.3oz with old style empty mag. .3oz OVER THE DANG LIMIT! So im right there! I am hoping the new mags will weigh .3 oz less than the old.. Also does anyone have hennings aluminum grips for the match, could I get a weight on those also? Thanks!

I just had the guys put a bead of weld on, I should be able to file this down easily and be back in action! Thanks guys!

Thats exactly what I was thinking. I just wanted to see if anyone else had run into this problem. My work has a full machine shop I will ask the guys if its something they can do.

I do have the Henning flat trigger kit. The new sear at 1st with no filing at all would not reset the trigger at all with the slide on, After filing some the trigger would reset on slide rack, but at the rage it would not reset after a shot. I took a sanding stone to it and did a little more, and this past weekend I ran 150 rounds with zero issues. Now I just want to get the safety working, if possible without buying a new safety lever.