[Happy Dance!]

O Happy Day  !!!

[Mag follower]

Get a paint stirring stick, cut to proper length and put inside spring.

[Please help me figure out the cause of my 223 squib]

Or, looking at the pics it looks like a fair percentage of the powder is discolored and could have been something in the case which contaminated a portion of the powder.  It's the primer or the powder that was the problem.

[Please help me figure out the cause of my 223 squib]

May have been a primer which did not fully ignite the powder charge.

[OAL acceptable variation]

If the bullets are not the same length, you will have an inconsistent depth in the case if the overall lengths are the same.  As long as all the cartridges  fit in the magazine and in the chamber I would not worry about the depth of the base of the bullet in the case.

[Can you help me with Stoeger M3000 mods?]

MOA did the work on my 3000, everything looks good and works.

[Norma brass, who's the imbecile...]

I like the small primer .45 ACP cases as I only have to get one size primer for 9mm, .45 ACP and .223/5.56.  I use small rifle magnum primers and have never had a problem with them.

[Questions from someone new to Glocks]

Unless you use small primer brass, like I do.  The main reason is that I only need one size primers for everything I shoot.

[Case lube for neck sizing only.]

Try it without and if it runs without jerking etc, then you are good.  If it seems to grab or jerk, then try some lube and see which seems to work the best for you.

[9mm Major = SMP or SPP?]

Neglected to mention that they are Tula SRMP primers.  Not available at the present time.

[9mm Major = SMP or SPP?]

My 9mm and .45 ACP are both 1911s.  18LB mainsprings but standard length firing pins.

[Which Media Seperator?]

[Zero Distance for 25-50 yard shooting]

Dead on at 37.5 yards.

[What do Open shooters carry?]

North American Arms .22LR.  Most problems occur at short range so you don't need a large gun/caliber if you can hit with what you've got.

[Small pistol primers in 9mm major]

I run SRMPs in 9mm, .45ACP and .223/5.56 and they work well in all.  Tula primers which are unobtainable now but I'm sure any will work.

[Dillon XL750 Sizing die]

Deprime first, wash with pins and then continue with however you do it.  I do everything in batches, you may do it differently.

[small rifle primer for major power factory limited / open loads?]

I use srmp's in 9mm, 45 ACP and .223/5.56, works well in all and it simplifies reloading.  (small primer .45s, of course)

[Dots are Dying]

I have a slide mounted Burris FF3 and have had no trouble with it in 3 years.  Don't shoot in matches with it but have had quite a few rounds thru it.

[Die (brand) Suggestions for 38/357]

I use Lee and have not had any problems with them.

[With this ring, I thee wed...]

[BEST PCC DROP IN TRIGGER ?]

CMC in my AR, never any problems and great trigger pull.

[Hello from Arizona!]

"not retired" or now retired ???

[Primer seating]

That sounds interesting, what is a wedding wiggly ???

[trigger shoes style]

Flat triggers.

[.356]

I run .358 in my 9mm,  never have had a problem with that diameter in 9mm.