Jump to content
Brian Enos's Forums... Maku mozo!

zen_grasshopper

Classified
  • Content Count

    169
  • Joined

  • Last visited

Everything posted by zen_grasshopper

  1. Steiner P4Xi excellent scope and the reticle is very similar to your Swarovski. It is only 1-4 though.
  2. Sorry that you don’t like the appearance, how do they feel for you? I would think that the grips effectiveness would be more important than how it looks, my grips have always looked like crap within a few weeks due to dead skin, ProGrip, dirt, and getting dinged up so appearance hasn’t been the top of my priorities. The grips are fully machined, as a former machinist myself doing the contours and texture that was done is not an easy process. To make it completely perfect with no machining marks would be cost prohibitive to the customer due to the increased amount of machine time for finishin
  3. compared to the original Scales
  4. Disclaimer: I don't work for SSI, or am sponsored by them, just want to help out a small business in getting the word out about these as they are new and these are the first two sold after they went live on the website and I personally think they are amazing. New grips from Shooting Sports Innovations for the CZ. These are the Scales 4.0 modular. Aluminum with the option to add weight modules to the inside of the grips to add some weight if you want. Brass and tungsten inserts are available. Here is the weight breakdown from the SSI website. SSI made some ser
  5. Factory firing pin and spring, 11.5 lb mainspring. CCI primers with a 1050 so they are seated properly. The factory springs I just replace at the end of the season but probably is not necessary. I found the extended firing pin and light spring was more of a headache than necessary as I had to replace the spring a couple times a year as it was so weak that it wouldn't hold the firing pin stop in place. All three guns are setup the same.
  6. Same as most of the guys I shoot with. Match gun gets cleaned before Nats so a few club matches and 6-7 majors, then a full clean. But if the extractor channel looks really funky between a few matches I will pull the extractor and clean it out, but leave the rest of the gun dirty. I tend to lube well. Practice guns, when something breaks or it stops working so usually every 10-15k. Generally will just spray down with Hoppes Elite, hit it with an electric toothbrush and then blast everything out with carb cleaner and reoil. Sometime in the winter I will break them down, give
  7. I still haven't turned off my Holosun 507 or replaced the battery since I mounted it, 7 months ago. With the right dot, the battery life is crazy long.
  8. The Edge is just blued and not that thick. It will wear quickly and rust fairly quickly. Keep it oiled.
  9. Missing the CZ 452 and 455. The P10F has had a silicon carbide job done since this was taken.
  10. Put some grease on the hammer strut. Your hammer spring is what is causing it.
  11. Bought one and threw a Holosun 507c on it. The thing is crazy easy to shoot, tracks well. Shot it side by side with my buddies 320 Legion and Deltapoint Pro, the CZ tracked better for me and was more accurate. I have polished the internals and put an HBI trigger in it, but left the factory firing pin spring so the pull is still 5+ pounds but decent. I really dig it.
  12. Compete with Shadow 2 Work gun Sig P320 Carry gun depending on attire and concealment needs Keltec P32 Sig P365 Glock 45 CZ P-07 All in JM Custom Wing Claw 2.0’s except for the Keltec with pocket carry
  13. Since the rule update to 4 oz over it is not a problem. All three of my Shadow 2s are under 50oz.
  14. I have them on my Shadow 2’s where they balance the gun a bit better and make it less muzzle heavy. I would use them on my S1’s if I was still shooting that model. If you like the Scale grips, the brass is worth it to me.
  15. I had one that was pretty bad and the serial was within 20 of yours, but yours looks way worse. I didn’t care about mine, just kept shooting it, it was replaced under warranty for a different reason. I am sure they would warranty that just call or use the form the website.
  16. I have the long Wing Claw 2.0 with the overhooks for the 43 and it fits the 43x and the 48 as well. Awesome holster, just need to replace the overhooks with the new discreet carry clips. Excellent holster and way more comfortable than it looks. I have 3 more of the same holster but for; Sig P365, Glock G45 and CZ P-07.
  17. JM Custom Wing Claw 2.5 is available in quick ship with soft loops for the 43X/48
  18. I definitely prefer the TR45 over the TR22's. The only time I go darker is when the sun is just over the berm in Frostproof. The more light transmission the better in my opinion, but the TR45's still provide some darkening compared to clear or the Prizm low lights. I find the Golf and the TR45 lenses are very comparable with the Golf having a bit less light transmission.
  19. If your Shadow 2's have triggers that you like, then no. I have 3 and one of the guns had a horrible single action, so I put the Race hammer from Cajun in, which fixed that gun. I then put them in the other 2 so they were the same. The only thing the Race hammer does is make the single action better, but some factory triggers are already good to go. The disconnector will reduce the pre-travel after reset, and reduce the reset a bit. Is it needed... no, is it nice to have... yes.
  20. I was more excited to see the Shadow 2 Rami style slide stops listed in the catalog, I hope they become available in the States soon!
  21. I have the .240” high ones with minimal adjustment to the rear sight. I would prefer the .100 or .105 to the .090 it is just a bit too thin.
  22. The lower lug of the barrel, the cutout that the slidestop goes through kind of looks like a peanut.
  23. @MemphisMechanic I bought a reamer and did both my Accu and Shadow, but when I got the 2’s I knew the reamer wouldn’t touch the nitride so I just loaded shorter. No real big deal, the load runs in all my guns and this length should give me plenty of room.
×
×
  • Create New...