FRANKIE D

I should chime in on this too. Got lots of great parts and excellent service in the past 2 years. A real good guy.

I have what you're looking for - the single action trigger system with a few spare parts too! Came out of the Witness Match. Now using Hennings trigger system. If still interested p.m. me an offer and we'll make a deal. Frank.

Really, Henning. I contacted Techwear to see if they'ld make me a Tanfoglio shirt. They want a release from the manufacturer allowing them to use the name and logo and I haven't followed up yet. It's just that at matches people are always aking me, "hey, what's that gun you're shooting?" Besides, I'm just envious of the other guys with their Glock and STI shirts. I want my own!

Thanks guys, I appreciate your thoughts. As I learn my way around Tanfoglio and handguns in general I can hopefully help out someone like you did me. Frank

I like your opening sentence Nealio. I guess if it ain't broke.... Any thought on mag spring changes? I just got some of the new K9 mags with Henning's 140mm base pads and Gram's 11 coil springs. After I let the springs sit for a couple days I can load 23 rounds - cool! Is there a way to tell if the springs are getting "soft" or doesn't that really happen? As you might guess I'm somewhat new to this sport and my Match is my first handgun.

Hi Guys: I have Match 9mm with approx. 10K rounds through it. I was wondering if anyone has some sort of "maintenance" schedule for replacing things like springs or other parts instead of waiting for some kind of failure and then taking action. I use Henning's flat trigger, 13lb hammer spring and long firing pin. I'm going to the Va-Md section match in May and really don't want a mid stage crisis. I've collected a number of spare springs/parts figuring I might need something which gets lost when I'm doing a deep clean on the gun. So, Any thoughts or recommendations? I'm also wondering about the firing pin spring that came with a 8lb Wolff recoil spring I use for softer practice loads. It's really long compared to the factory spring. Has anyone used this spring or should we stick with the factory FP spring? Thanks for your ideas. Frank

I've been absent a while but did I just read tha Henning's coming out with a new mag release? This could be a real winner for guys like me who can't reach the stock release on account of a somewhat short thumb. I would love something on the order of the old Tanfo release that extended across the grip. One of the guys on this forum had one for sale earlier this year and I just missed getting it. Henning, keep us posted on this project. You'll probably get a lot of takers. Peace baby! Frank

Hi Guys. I also live in Ct and have been looking for a USPSA classifier match. I've never shot one and really need to get started. Anyone know of a club that maybe routinely hosts classifiers? Or maybe a list of clubs I can call to see if anything is going on? I've been all over the web trying to find something out but I'm just not having any luck. Any direction would be greatly appreciated. Thanks Frank

I've got one I'd be willing to sell. If your interested send me an email, I'll look for it next week and come up with a price. Hi Gik21c... I would be interested in your mag release if you still have it. Let me know. Thanks...Frank

Hi Nuke: I saw the exact same mag release on a Tanfoglio either on the Henning's shop section or in the other Tanfoglio area. The owner was showing pix of his gun and a number of viewers wanted to know where the heck he got the mag release. I tell ya, I have the same short thumb issue and would LOVE on of those babies. Henning, I think this would be a blockbuster of a sale item. I you guys get a lead on these or, Henning if you get them going let me know. I'll get in line for one. Happy Fourth! Frank

Thanks Henning for the heads up. The "questions" address is definately working today. I don't know what was going on but many thanks for answering my questions. My order follows on your site. Good luck Frank

A few days ago Henning posted a mail address for parts or product questions. I've twice since then tried mailing <<questions@henningshop.com>> and my mail gets returned as undeliverable. Anyone else got an issue with this? Or, if you have a pipeline to Henning can you give him a heads up so he can get this fixed. I have a sear related question I'ld like to get answered before I place an order on his site.

Henning: Jason's mail I sent him bounces back to me "not a valid address.. You got a fix for this in the works/ Frank D.

Henning...Congratulations on your latest endeavor. Henning's parts avail worldwide. Has a nice ring to it. Hey Help me out here. The E-address for jason( Questions@henningshop.com) isn;t valid. My mail is bouncing back to me. I lost my trigger reset screw while cleaning and need the size so I can get a temporary replacement. Can you help with that. No time to order one.. got a match to shoot this weekend. Thanks Frank DeLuca

I recommend the Uplula. It's solid construction and should last a good while. I push it against my "gut" if no table is handy. Ladies could try a wall or any other solid surface - it doesn't need to be vertical to work properly. Best $30 investment I've made in a while. Regards, Frank

Henning is out of the country right now. He'll be back in touch 3/1 or thereabouts frank

My witness Match came out of the box at bit over 5lbs. Following Henning's recommendations for trigger tuning I've go it now just under 3 lbs. Using Henning's 13 lb hammer spring, extra long firing pin and lots of polishing on moving parts.

Say Moss_berg... Did you get your new front sight installed? I had to spend a little time shaving some metal of the bottom of the sight, per Henning's instructions, to get it to fit into the dovetail. Now it's on to the fiber install. Frank

Thanks Henning: Just got a message that my sight fot the Match model is waiting at my local post office. Can't wait to get it on and try it out! Peace baby Frank

Sounds a bit fishy to me

Mine came out of the box a bit over 5lbs on the trigger. With a lot of polishing of moving parts, Henning's 13ld hammer spring and x-long firing pin I'v got it to about 2 lbs 12oz. Pretty sweet.

This discussion is great so I had to chime in. I just bought the Witness Match 9mm a few months ago which came with the one mag. Oddly, this mag had a "long" follower and no spacer. I probably shot that one mag about 500 rounds without a problem. I recently bought 4 more mags which came with the front spacer. I was concerned about this having read about the front spacer mag issues but I shot them a bit and they worked fine. Thought I was one of the lucky ones. Nyet! Lately this has beeen the issue: with only 6 rounds loaded the last or next to last round will "jam" in the chamber with about 1/4" of brass showing. Gun will not go fully into battery. I cannot push the slide forward to fully chamber the round nor can I eject it unless I drop the mag first. And of course this has too be an intermittant issue. The same mags won't always have the problem. Sometimes the mag feeds ok through the last round and sometimes it doesn't. It's really making me nuts (moreso than I already am anyway). I'm not averse to buying new mags if you think it might solve my problem. I don't think it's an ammo isssue because I can put the "jammed" round back into a mad and it shoots. I use factory fmj,rn usually federal or remington and it happens with all ammo. So, whatcha think? CZ mags? Pull the spacers off and replace followers with long ones? Anything anyone can contribute is gratefully appreciated. PS - Tanfoglian is right - This forum is the best place for tech support.

I got nailed just a week ago. Brass bounced off the seperation panel between me and the next shooter on my right. Smacked me right in the corner of my eye. I was glad I was wearing wraparounds. Could have been an "ouch" moment. Frankie D.