DIV7703

Always file or stone on the cheapest part.

Try this company. Single Sheet Griptape - Jessup Griptape

ezra650, the longer screw do not touch the slide.

My wife shoots a Springfield 1911 9mm loaded with the Burris FireFire 3 with the dovetail mount. We had some problems with the factory supplied screws being to short and pulling the threads out of the dovetail insert after around 5,000 rounds. Bought some longer 6-48 screws and cut them down so the screws bottoms out in the dovetail insert, problem solved.

My wife and I are taking his class this week end in Whitewright Texas at Mission 160 range.

Great match! Chris must have bought every can of black spray paint in the Memphis area.

My wife has three Springfield 9mm 1911s: Stainless Loaded with a Burris FastFire III optic and all John Harrison parts, this her primary IDPA gun Stainless Rang Officer with a Burris FastFire III optic and all John Harrison part this is her back up IDPA gun 9mm compact carry gun The all have been problem free.

I have used: 231, BE-86, Titegroup, Bullseye and settled on VV N310.

I have one and it works!

Very happy with my 230 grain FMJ over 5.8 grains of BE-86. It passed the Chrono ( New Radar thing) at the IDPA Lone Star Match in Cresson Texas last Saturday. They came out at 750FPS and were accurate shot out of a Les Baer Concept V.

UberScoreMaster - Rapid IDPA Score Entry, Publishing and Match Management

Signed up to shoot CDP in Squad 11 with the Collin County Gang.

In my case 5.8 grains of BE-86 under a Winchester 230 FMJ gave me an average of 760FPS and a FP of 170. COL 1.255 Temperture: 57F Number of shots: 16 Pressure: 30.4 inHg Minimum: 740 Bullet Weight: 230 Maximum: 187 Power Factor Avg. 175 Spread: 75 Power factor Low: 170 Average: 760 Power Factor High: 187 Standard Deviation: 18 All were shot out of a 5" Les Baer Comcept V .45ACP

Has any one played around with 165 gr Extreme bullet for 9mm? I have the following powders: CFE Pistol Titegroup BE-86 Win 231 Bullseye Looking for some starting loads for 125 PF. Thanks

What a time saver records all the data on the Ipad or IPhone, when I get home just push the data to the wireless printer.

Current prices have been running around $50.00+Flat rate shipping for mixed headstamp cleaned.

The attached PDF may help. RanierMWdata.pdf

I sent mine in to Starline and what a difference.

I installed them on my XL-650 tool head, did not see any great difference. Was more concerned about stripping out the inserts when removing the tool head. They are now living in a drawer in the shop.

I saw a load in one of my books and thought it was strange.I will see if I can't find it and get back to ya.I never saw a 230gr.swc so the load kind of struck me as odd but they do sell them.What Co.I would like to try some. Hornady # 12308 LRN 230 Grain COL 1.245 Diameter 0.452 What powder do you want to use? Found the above data in The complete reloading manual for the .45ACP www.loadbooks.com

This should get you started: http://www.shooting-...ntry=&FoundID=0 I would try the Prescott area

Darren, Got the belt loop today and it looks like it was made at the factory. Great Job.

Darren,I would like one, however do not have a paypal account. Will be more than happy to send you a USPS Money Order. Skee

Look here:http://www.starlinebrass.com/faqs.php

I was having the same problem with my Dillon .45ACP expander. Don't remember where I saw the article that the .45ACP expander were a bit oversized. I sent mine to a company ( can't find the link ) they cut down and polished it for free. Problem is gone. Found it:http://www.starlinebrass.com/faqs.php