cguy1177

designed for weather radio audio jack out alerts, but might work with the buzzer audio jack out from a timer? Not too pricey to try and amazon has great return policies. http://www.amazon.com/Midland-18-STR-Strobe-Weather-Hazards/dp/B0002UB2K0/ref=sr_1_1?ie=UTF8&qid=1399488569&sr=8-1&keywords=strobe+alert

ok, I had thought the RO could press it against the back of your neck/head and you would feel it then start the stage. I'll ask my friend who has a similar problem though I think he uses a shot timer with a strong speaker that creates a vibration and has it put up against his neck/head. I can see why you would want the strobe.

Bill, not sure about the strobe approach, but what about using a timer with an audio out jack and a vibration device like this? http://www.enablemart.com/hearing/deaf-alert-systems/clearsounds-shk-vibrating-pad

Alternatively you could have a gunsmith ream the barrel slightly to accommodate the rounds. I'm probably going to do this with my cz.

Thanks for the data. Seems like es and sd are pretty good!

SDc, Dave/CGW mentioned to me that he might have an option for adjustable sights in the next couple of months when I called down there a month ago. Did he mention anything about them to you? Sure would be good to see some, maybe they got delayed or aren't working out I guess.

CFE pistol has only become available for purchase in the last week, so as you probably know there is not a lot of data other than the published and it may take a while. I'll be working up my own loads this week with xtreme 124FP. You have't said what power factor you're looking for, but I would do a ladder with the starting FMJ load at the Hogdon recommended 4.6, 4.8 and 5.0 and chrono and shoot for accuracy/power factor to find what you want/like/functions well just like any other work up. Your results are going to depend on what your gun likes, barrel length/tightness etc. etc. Look forward to sharing/seeing your data!

Mine needed a little polishing to work smoothly but runs great now. I think I used a qtip with some mothers metal polish on it in the drop hole. I actually load directly into dillon spp tubes ( 8 ) and then start my loading session. works great, not sure what you're saying about the upside down part? try polishing it up/smoothing any burrs/plastic flashing.

let's see what Jerry uses... :-)

you beat me by a couple of seconds! the adjustment is usually pretty easy though it can be a devil of a time with odd, neutrally weighted bullets like the CTX frangible 9mm that midway firesaled a year or so ago.

Nevermind. there were 43 in stock when I posted. then I rechecked and it's at 0 in stock now....max of 3 whole minutes later.

some available right now for those wanting to try if you can get past the hazmat fees for the qty you want. probably be gone in a hour. http://store.thirdgenerationshootingsupply.com/browse.cfm/4,21690.html

also bear in mind that typically FP's are shorter bullets than RN so what's important for chamber pressure is really 'seating depth' of how much case volume is available. For a shorter bullet (FP) with a shorter OAL this can be the same as a longer OAL with a longer bullet. Hope that makes sense and gives some peace of mind.

Check your FP channel as noted. SP01 tactical with CGW ext. FP and 13lb mainspring lights off my tula SPP 100% and even ignites wolf SRM's. not sure about any diff. between CGW ext. FP and CZC. I Load on a 1050 with primer depth adjusted to work. I have heard of some wolf/tula lots having QC issues ( missing anvils on 1% etc )