Jump to content
Brian Enos's Forums... Maku mozo!

oteroman

Classifieds
  • Posts

    425
  • Joined

  • Last visited

Everything posted by oteroman

  1. IMO WST is a good powder for 115 and 124 for minor PF It is not a powder I would choose or suggest for 147gr. Unless you chrono your loads and stay at minor PF or below with 147’s There are better powders IMO for the heavy 9mm 147 loads. Be careful if you go forward. Sent from my iPhone using Tapatalk Pro
  2. Now that Ammobot Version 3 is out does it sense jams better than Ammobot version 2 ?
  3. I just read this thread and it would be great to start fresh. Ammobot had a MAJOR upgrade- AMMOBOT AUTO DRIVE REV3 FOR DILLON 1050 I suspect all of the previous post where older versions. Ammobot V3 vs. Mark 7 looking for feedback PLEASE (I am not wanting or expecting a Shi*Fest on either vendor)
  4. If your swager is set correctly a small primer 45 will lock up the press or at a minimum give you a heads up from the amount of force needed to complete the cycle. Be aware of your pull force. Do you feel the lack of force needed when a 380 slips through an you size it?? Hardly any force. Train yourself to be aware. The press gives you feedback. Sent from my iPhone using Tapatalk Pro
  5. The web site is not operational yet. Sent from my iPhone using Tapatalk Pro
  6. Explain- (a little more information) " stopped it from jamming "
  7. I feel Hi-Tek is better for the rifle bullets when you want to push the envelope. Sent from my iPhone using Tapatalk Pro
  8. Man I wish I had a MC. I smelt range lead, cast and coat all my projectiles. Sent from my iPhone using Tapatalk Pro
  9. Considering the support staff, the brick and mortar building and the volume they sell, to me it is a bargain. Sent from my iPhone using Tapatalk Pro
  10. Welcome to the Blue presses. I am not a watch guy. If a 550C is a Rolex what is a S1050 Sent from my iPhone using Tapatalk Pro
  11. Title says it all. Sent from my iPhone using Tapatalk Pro
  12. Sure it will work. I have a 929 running short colt; I prefer doing reloads with Short Colt vs. 9mm My preference. Everybody get to choose, play and have fun. Nothing is mission critical LOL I know many that run Short Colt in 9 mm revo's Unless there is a safety issue I don't see the point of telling him don't do it. You will find more info in the REVO section or on another revo related forum. Enjoy
  13. I put 2-3 drops on a Q-tip and rub on the shaft base at 4 points equally. I use Mobil1 it lasts a long time. Sent from my iPhone using Tapatalk Pro
  14. Deal good throughout Tuesday at Bayou Sent from my iPhone using Tapatalk Pro
  15. All caps. “BFCM2017” For 10% off all case pricing at Bayou Per an email I received from them. Sent from my iPhone using Tapatalk Pro
  16. Bayou has 10% off I believe. Saw an ad a few hours ago. Sent from my iPhone using Tapatalk Pro
  17. Lube your brass. The U-die will work. I run U-die on my1050. Lube Sent from my iPhone using Tapatalk Pro
  18. Is there a budget camera with ZOOM? I would like to fill the monitor with as much of the case mouth as possible. Sent from my iPhone using Tapatalk Pro
  19. First Titegroup is a know “Smokey” prone powder. There are many other less smoke prone powders. Sent from my iPhone using Tapatalk Pro
  20. Did you mean to say you run the tumbler overnight? Like run a batch of brass in walnut overnight, then run that same brass in corn media the next night? Trying to clarify/understand your procedure.
  21. Replace speaker on powder check with a LED pick color red green blue white yellow A buck or two Sent from my iPhone using Tapatalk Pro
  22. I would suggest put a bright LED on it. Sent from my iPhone using Tapatalk Pro
  23. Try it and let us know the results. Sent from my iPhone using Tapatalk Pro
  24. Love to a pic! StuckinMS Sent from my iPhone using Tapatalk Pro
  25. He asked about Titegroup. Who sells Solo 1000? Sent from my iPhone using Tapatalk Pro
×
×
  • Create New...