jmurch

I have a few Les Baers and I'm thinking of selling my 99% out of 100% condition P2 Super Tac. Is this a gun that popular at all in single stack? Thanks, Jeff

OK more info. First off I screwed up my first post. It shoots 14" LOW (below POA) at 25 yards, I originally put high and noticed it when I read Steve RA's post and thought that ain't right. My first post hs been corrected. Thanks for the Dawsons tip they had a great PDF on there to calculate the sight height. Using Dawsons formula my front sight (I'm a rifle guy can I call it a post?) needs to be 70 thousandths shorter. Based on my lack of knowledge and questionable measuring that would make the correct front sight height 90 thousandths. There is no way I can have that short a front sight there will be almost nothing there right. So my rear is too short right? But unless I'm missing something you can't specify the height of the rear. I really don't care to go to an adjustable but is that my only option?

I have just managed to trade up to a Springfield 1911 PX9801LP which is basically the 3" 1911. I ran around 200 rounds of different ball ammo and it functioned fine no failures at all. I was a little concerned about a 3" 1911 but not now. The problem is however it shoots a good 12" low at 25 yards with a COM hold. Since the factory night sights are dim anyway I am willing to buy new sights for it and I really don't need or want to bother with night sights. I'm wondering though if new sights will fix the problem. It's possible that some previous owner just put on a new rear and kept the front and that's why its shooting high but how do I know when I order sights? Is there anyone on here that's could figure this out for me? I live a whole 5 miles from Rio so I'm available or open to suggestions. I also just want a simple fixed 3 white dot setup no adjustable nothing complicated. TIA, Jeff

Try: Ebay.com http://salem.backpage.com/SportsEquipForSale/ http://salem.craigslist.org/ I have got a few good deals from garage sales. Got a Redding BR powder measure for $5 and a Rock Chucker for $15. Nothing at all wrong with a used press and I load all my rifle sigle stage. Jeff

My daughter was started the same a G-ManBart when she was 13. All I had at the time was a 1911 and she loved it. When we moved to AZ and were closer to a range she went to our range's Jr. Smallbore program. The first time she shot a .22 she was 'What the.........'. Jeff

Community center?? Geez mine was in the target shed.......... Jeff

Today's word is................. Fluctuations. At the bank there was a short line. An Asian lady was trying to exchange yen for dollars. It was obvious she was a little irritated . . . She asked the teller, "Why it change? Yesterday, I get two hunat dolla fo yen. Today I only get hunat eighty? Why it change?" The teller shrugged his shoulders and said, "Fluctuations." The Asian lady says, "Fluc you white people too"

Nothing cleans off oil or grease like clean oil or grease.............. Jeff

+1 on chamfer. Giraud or Gracey. Jeff

If you dont have a case guage you can keep turning down the sizing die a little bit at a time until the case will fit into the chamber far enough for the bolt to lock. The way to do this is to removes the upper and strip the bolt to remove the ejector and ejector spring so the the bolt will insert into the locking lugs and turn easily. Jeff

+1 on the G17. Cheapest to shoot. Jeff

It's nice to see an inexpensive scope with a decent reticle. Jeff

What exactly is a 'for the kids rifle' for? At our range they have a Jr. Smallbore I think it's 12 and up. They go through the NRA Version of Junior Distinguished for smallbore. If this is what your looking at you can look at the Jr. Division page at http://www.riojuniors.com/ . If you like PM me I'll send you contact info for the director Ed. He's a real nice guy I'm sure he will do what he can to help. Jeff

I reload .223 2k at a time. Jeff

Go buy an after market spring or call Glock and have them send you an 02 (if it isn't already). Jeff