ppclinkoping

we have checked some 986 also, 9x21 cylinders instead of 9x19

First test I did with my X-six and the pulver barrel, prone on 50m with a 2,5-8x scope in the sig sauer mount. 12 shoots with the ammotech competiton bullet in 0.355 http://forumbilder.se/DE0BS/p1010766

I use the swedish ammotech 123gr tc match bullets with vv N330 1080ft/s

Just recived two 9x19 1/24 barrels to my sig sauer X-six from Ray pulver. Super accurate barrels that brings the Sig system up to a complete diffrent level to print small groups on 50m that you only could dream about before.

webpage up http://www.ppc1500wc2015.se/ winchester/ vectan/ Hodgdon / VV and some accurate powders are avalible in sweden. Also Magtech 9K for those who dont reload 9mm. Bullets, haendler & natermann bullets are avalible and in 9mm the swedish Match bullet from Ammotech (world record bullet) with some others you just have to tell in advance. reloading equipment will be avalible on the range.

For those interested to travle over the pond and compete in PPC, the WA1500 World championchip in PPC will be held in stockholm 2015 primary 13tn to 17tn of aug 2015.

The X-series SAO need's a lot of fitting if you mount a E2 grip. But you dont need that, the houge g10 is smaller than the E2.

I shoot mainly PPC. And I do it within the WA1500 organisation around the world. In Sweden there are 54 events in the Swedish cup + the nationals and regionals this year. The WA1500 org holds both European and World championships in PPC. www.wa1500.org

Karl Hamann in germany for 1911/2011 builds, Heribert Bettermann for Sig sauer x-five/x-six builds and Ray Pulver in Australia (who makes the best handgun barrels I have ever seen in my life)

I use N330 for my PPC loads behind a 123gr Comtri TC bullet, 10 shoot's on 50y is no more than 1.105" from the ransom rest. 4,2gr to 4,4gr do magic in a 6" 9x19 barrel with 1/16 twist with the Comtri TC bullet. very very stable in speed. N330 is in my opinion THE powder for 9x19.

I will travle from sweden to australia. It looks like i have to reload at site. I reload and use both the new 115gr zero conical and a 123gr TC match bullet made by Comtri in sweden. The TC is a high prefomance bullet that gives me 1,3" 24 shoots groups at 50 from my 6" gun. I haven't found any fatory ammunition in europe that will be ok to use in a match. So that's why I asked here.

Hi A question around factory ammunition and travel. What type of 9x19 would you buy if you cant bring enough ammunition to a competition. 6 inc barrel 1/16 twist, no comp. plans are to travel 8400 miles so I have to buy on location.

I shoot three 9x19 x-5 and a 9x19 x-6 in PPC, X-five SO SAO in stock semi auto, X-5 std in Dist pistol, X-five open build for the new PPC class OPEN and a high grade rebuilt X-six for pistol 1500 with a short frame weight, IGB 1/16 barrel and tungsten guide rod for 1911 springs. For IPSC Im using the x-five open gun but I need more rounds in the magazines to be better, 20 rounds is not good enough.

I use Redding and a special made hornady for my PPC loads. Load a 123gr TC bullet made by Comtri In sweden. Most accurate 9mm bullet I have ever tryed out. For my IPSC I use redding and dillon depending on the bullet type, Ares seams to like Dillon and frontier likes Redding. I run all my brass twice, 1st run is to rezice and trough the LFCD die. Second is primer, powder and bullet.

I have found out by help that both the linkage and the base are diffrent between the RL1050 and the Super 1050 drive. Anyone that has a Super 1050 drive for sale that could be shipped to sweden?