Jump to content
Brian Enos's Forums... Maku mozo!

oddball

Members
  • Posts

    7
  • Joined

  • Last visited

About oddball

  • Birthday 02/22/1954

Contact Methods

  • Website URL
    http://

Profile Information

  • Gender
    Male
  • Location
    Lesage WV
  • Real Name
    rick gebhardt

oddball's Achievements

Looks for Range

Looks for Range (1/11)

  1. Well I bought a Dillon 650 . Then I looked at prices for the "extras" Being from WV I had to come up with a different way to get it to work cheap like my Lee pro. Here is what I came up with: to change cal I got the shell plate for each. I got the 460S&W case addapter. I took a Lee shell feeder from the Pro and mounted it on the Dillon used a hose clamp and bent wire to adjust for the different shell height. Called Dillon and told them I lost the shell pins . They sent whole set free. I now have it set up for 9mm,38spl,40s&w 44mag 45acp 45colt and a shell feeder for under $150 Also had to get the powder expander but only for 38 40 44 and 45
  2. Well I bought a Dillon 650 . Then I looked at prices for the "extras" Being from WV I had to come up with a different way to get it to work cheap like my Lee pro. Here is what I came up with: to change cal I got the shell plate for each. I got the 460S&W case addapter. I took a Lee shell feeder from the Pro and mounted it on the Dillon used a hose clamp and bent wire to adjust for the different shell height. Called Dillon and told them I lost the shell pins . They sent whole set free. I now have it set up for 9mm,38spl,40s&w 44mag 45acp 45colt and a shell feeder for under $150 Also had to get the powder expander but only for 38 40 44 and 45
  3. That is what the strong mount was made for. But you need a lowered place to mount it. It works good if you want to have a "catch" area. I made a set up for a buddy in his den. Took a large restaurant type meat tray and mounted the strong mount in center and bolted through bench. It catches the dropsys
  4. Do you have dirt under the shell plate? Right shell plate?You say moving case around It shouldnt be able to move . If whole plate can move the rubber O ring is not under the hold down nut.
  5. There is a guy on Cast Boolit that makes a check maker in any size. They guys seem to like the aluminum beer "bottles" to use for material
  6. There is a couple of things that work . The one I used was cutting off the top of a Lee sizing die. That will let you push it through.Chop saw works fine. I made one for 9mm by reaming a 38spl die out. 9s are taperd so die has to be so rim will pass through . I had a Lee type push through bullet size die mad for 45acp, It also has to let rim pass. All work good good
×
×
  • Create New...