310yuma
Members-
Posts
47 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by 310yuma
-
147 or 160 bullets will work just great, in my opinion nothing but round nose as any thing flat will find something to catch on at the wrong time.
-
Well it is enough not to have any more blown cases
-
I had a 10lb recoil spring, had 2 cases blow out no major damage. Went to a 12 lb spring blew another case,now using a 14lb spring at least 1k rounds with no problems,fired cases are not bludged
-
2021 Area 2 Championship
310yuma replied to 310yuma's topic in Match Announcements - Pistol Only - USPSA, IPSC & Misc.
Got in last night Thanks -
2021 Area 2 Championship
310yuma replied to 310yuma's topic in Match Announcements - Pistol Only - USPSA, IPSC & Misc.
Thanks Hope l can make it -
2021 Area 2 Championship
310yuma replied to 310yuma's topic in Match Announcements - Pistol Only - USPSA, IPSC & Misc.
Thanks, If you do hear of something please let me know. I know that it is a well attended match and l have never been able to be in the area at the right time of year -
I had the same problem, had 2 first one would not wake up put back up on and two matches later it went out. Sent both back to Leopold and 3 weeks later they were sent back with new circuit boards , so we will see how long they work this time. Both only had 4k -6 k rounds on them
-
I have the DDA mount for the Aimpoint and a Romeo 4 , the H1 mounting holes are about 3/8 " shorter than the Romeo. The mount is too short to drill any other mounting holes
-
Bullets are too big, find some sized to .400 .I had the same problem and that solved it
-
Thanks, that is the problem, I looked at the rule book, it does not say anything a bout the frame ,just the slide Thanks again
-
I have a Colt 1911 that has been used for NRA Bullseye,it has holes drilled in the dust cover of the frame to facilitate the installation of a frame mounted optic. I want to remount the iron sights and use it in Single Stack. Question ,will this be legal ?
-
Has anyone direct mounted a DeltaPoint Pro to a P320? I am looking for a larger dot that the 3 moa that comes on the 320rx
-
I think that was the one, but I only just looked at it quickly in the case
-
Just picked up a p320rx from Big Bend Outfitters in Perry, Florida for $785, they told me that got 6 in last week and now they only have one left They also have the model ? 226 with the Romeo 1 mounted,places looks like they stock a large amount of Sig items
-
I have had several sets of Nill grips and they were never loose and when new they were very tight. Over the years I have had grips get sloppy and just shimmed them. If you are concerned you should just contact Nill.
-
Unless something change last night only the 9mm is on the production list, my son has made several calls to both Sig and USPSA with no postive results as to when the other calibers will be placed on the list
-
3.2 gr v320 147 Black and Blue ,1.15 oal chrono at IRC today 128 pf Very clean with soft recoil
-
You can only cut 38 special case down to 38 super (.9 or so) without reaming inside of case (not worth it) I cut some down but found it was much easier just to buy short colt cases from Starline They last a long time, I think out of 3k cases in the last 3 years I have found 2 split cases
-
You young guys make me laugh ,I shot NRA bulleye in almost another life time started and really did not shoot USPSA until I was 65 . I am the old guy with the revolver, but that is what I like to shoot. I stared out with a C classification , became a B with a national bump, but plan to make A before the year is out. Eyes don't work as well and some snails are faster but I am having fun. We are not here for a long time but for a good time.
-
I had the front sight pop out on both a stock 627 and another with a Weigand sight base. On the smith I just put a pin in it as I really do not need to change it anyway. On the Weigland base I punched out the front pin and tapped the base for a 8-32 set screw Have not lost either since the mods
-
2015 IRC in Fallon Nevada
310yuma replied to Ty Hamby's topic in Revolver Match Announcements and Discussions
They have most of the big chain ones Comfort (we like), Best Western, HolidayInn and others .All are somewhat close to the range as it is only sevreal miles out of town -
Well ,if you think you need, to do it,you are not going to win but at least you are out shooting and having fun, that what life is all about Rmember you are not here for a long time, so have a good time
-
I thought I had heard/read it all until...
310yuma replied to RevolverJockey's topic in Revolver Forum
Try this link, they are usually in stock http://dominionhobby.com/Nill_Grips.html Really nice grips and if you want a closed back strap they work great -
I now have several mounts and all are very close in overall height. I did order a Weigland (ordered on Monday delivered on Thursday great service) and I think it may be just a little shorter plus it is the only one that is machined out to go over the top strap and not just sit on top. Looks very strong Also if you are going to mount a upright C-More I think the lowest is a slide right mounted to the Allchin mount and not even mess with a Weaver mount