echase1

I am trying to get the trigger feel of my limited to feel like my Stock II. What would be needed to get the "break point" of the trigger to be the same as the DA trigger I have on my S2? Could I just swap out the Trigger, Disco, sear and Hammer and get roughly the same feel?

Thanks yvk... That sounds exactly like my symptoms Sent from my iPhone using Tapatalk

Just checked...That load will plunk and spin in both of my Unmodified Stock 2 barrels. Sent from my iPhone using Tapatalk

Unmodified barrel... I don't know if they plunk and spin or not... I chamber check in a hundo and the gun runs fine with that load Sent from my iPhone using Tapatalk

135 blue bullet. 1.13 oal. About 132 pf Sent from my iPhone using Tapatalk

Yes I do... 9mm. Stock 2. Cases won't eject. About 1 per 100. I have tried both 9 and 10 lb Recoil springs. Sent from my iPhone using Tapatalk

Can someone explain the process of properly doing a Re-profile of the ejector on a Stock 2? Sent from my iPhone using Tapatalk

Need to order some primers. Other than Fed, which of these two primers do you feel is the easiest to set off. Thanks Sent from my iPhone using Tapatalk

All, I am having an issue where my Stock II will sometimes FTF on the next to last round. This does not always take place, but when it does happen, there is only one round left in the mag. If I hit the mag release and drop the mag about an inch, the gun immediately goes into battery? Any ideas as to what might be happening? Thanks in advance.

With the Euro to Dollar conversion being what it is now, it was easier for me to order it all from EG's pro shop. Took about 10 days from order to arrival.

Yes, I do. Sent from my SM-N915V using Tapatalk

In the event anyone finds themselves in this situation... I called EAA. They informed me that they do not carry individual sight parts, but could sell me an entire assembly. So I looked around the different spare parts containers. A 1911 mag release spring seems to be the perfect diameter. I had a reduce power one that I never use so I cut it down to size and problem solved.

I am seeing this issue with both the number 1 and number 2 followers Sent from my SM-N915V using Tapatalk

Does anyone know how to fix k9 mags with these issues? I have been having issues with the 9th round as this thread and I have several mags that the follower will tilt up on like this video demonstrates. Thanks!

I had my vertical adjustment screw come out during a match today. While I was fortunate enough to find the screw and one spring, I am still one sight spring short. I have looked at several places to buy a replacement supersight spring. Does anyone know where I might buy such a thing? Thanks!