ak_tech

Im not sure if this is helpful but I just got the Hypertap and i thought it was very loud, but I didn't have a Titan to compare it to. But it did a great job reducing recoil.

I have used both and notice no difference. The same load works for both, etc. So other than cost I notice no difference.

Thanks, I already run an ar tube with a VLTOR IMOD.

I have what sounds like a similar issue and I run the 510c on my MPX without issues.

I shot Xtreme exclusively for years and have had several bad batches as well as others in our club who did group buys. Multiple guns and multiple shooters with the same issues. Bellow pics are the same gun, same day, same shooter (me), same ammo components (except bullets). The only thing that changed was Xtreme bullets and Everglades Bullets. Not sure what else to tell you.

I did some accuracy testing and my MPX liked the Everglades way more than the Extreme (.25 vs 6" at 25 yards). So for me its not worth the savings. I would run some tests.

Thanks a bunch! I found it

I hear that there are new standard (percentages) for classifying in PCC (and others). I did a search but couldn't find anything. Are these in affect now? If so, what classifier calculator are people using? Any info / clarification would be great. Thanks

Ziplock bag or random box laying around the garage...

My glock mags are the limiting factor for me 1.150 OAL so i load everything to that length. Works great in my 1911, M&P, XDM, and of course Glock. I have also used 1.135 with the same result. Im sure I could fine tune the loads for the guns but I didn't find the need. They all feed reliably, have the level of accuracy I want, and its way easier than having to keep track of what 9mm ammo goes with which gun. The only exception to this is that I try to make my 9mm Major look as different as possible (OAL and I used Hollow Points) to avoid any mishaps.

"Shooting a 65 grain Zero jacketed bullet over 4.6 grains of N320" I assume you mean 165 grain bullet...? Like you said check the magazine. Is it always on the reload? Are you slowing the slide down by pushing on it with any fingers / etc? Do the bullets feed smoothly when you let the slide down slow?

My mags are brand new gen 4 mags, so maybe there are issues with new mags too. I didn't get a chance to call them today.

I just tried them in the 9mm and they work fine. Must be something to do with the 40 S&W like you said.

Also this is on a gen 4 Glock 35 with gen 4 mags if that makes a difference to anyone.

I looked at the video and I had to also radius the front of the follower a lot. On the 18th rounds it kinda make a click and pushed past something. Now I can squeeze a 20th rounds in but it is so tight it will not load into the gun. Ill call Taran Tactical tomorrow and see if they can help.

No I didn't put that in there. I'm pretty sure I have done that before too though

Ill try that now and see in that helps.

My Glock bullets are loaded to 1.145 and I can only get 18 in them in the tube with the Taran Tactical large base pad. The 18th round I has to be pushed very hard, even bending my speed loader, which I have never had to use before. What OAL are people using with these base pads? Could that be the problem? Are there any other Ideas? I have already taken off the edges of the follower with no success and im using the springs that came in the bag with them. Thanks

I have shot almost 50k X-Treme in 9mm minor and 40 major. Never had any issues and way cheaper than what I was shooting before.

This has some of the info on STI process. Inside STI: Shooting USA takes a closer look

VV N320 @ 4.7g, 180g Bear Creak Molly @ 1.80" COAL = 172 PF @ 85 Deg. F Also on a side note this is the best load I have found for shooting lead that smokes the least. I shoot indoors sometimes and this one is barely noticeable. Its also made PF everywhere from 45-115 deg F.

I have owned both and sold the new Para Pro Comp 40. The STI was not as pretty as the para (ionbond) but it had better fit and had better fit parts. The para needs complete new parts for the trigger and the STI needs a little spring tuning. Also on the Para the firing pin stop looked looked like it had no hand fit and was hammered into slide (hard) it also had a loose barrel bushing (compared to the STI). The Para broke after the first 150 rounds. When it got back from warranty I sold it. Thanks my .02 anyway. Good luck.

I own a technology consulting company and work with Mac, Windows, and Linux. Just remember they are all just operating systems on the same hardware (for the most part) and they all have their pros and cons. Macs have a great user friendly operating system but just dont drink the kool-aid. They absolutely don't "just work". I could write about 10 pages on things they are not compatible with and cant do. Admittedly mostly in a mixed business environment with Active Directory, networking issues. Mac people will tell you that they can just run a virtual machine and I say if they have to do that they just over paid for the same hardware only to have to run windows anyway. Additionally VMware vitalization software for Mac is gimped and not as full featured and can cause some big issues if trying to manage a virtualized server infrastructure. Also, they can and do get viruses and malware but substantially less. Remember most viruses these days are designed to make money and not to change your desktop background or something stupid. Hundreds of thousands of Macs were infected for years and no one new about it. Apple business practices with user agreements, not fixing knows security issues for long periods of time, always passing the buck and responsibility when something goes wrong, banning people from their forums who talk about defective software / hardware, and etc make them more like "big brother" than the stylish alternative to the status quo they that advertise to be. Opinions very greatly on some of this though and this is just my experience working with them for 25 years. However... You may not think that I hate mac, which I don't. In fact, I recommend macs all the time. Their closed ecosystem nature makes them more stable, although windows is getting much better in this regard. They are easier to learn, more stylish, and are true innovators in the technology world. The Iphone and Ipad have changed how we use technology today. Additional, I really like the Macbook Air and when they come out with one that has retina display and 8gb RAM ill probably get one, nothing windows has comes close to this machine.