George Tucker

Always went above and beyond with stuff for me, A++++++++++++ it just dont get any better than Dillon for service, George.

Can a 450 Powder Measure be changed to work on a 550B?. thanks George.

Thats what i wanted to know, thanks George.

Thank you, George.

How does one greese the pivot pin thats in the bottom main shaft? could a guy drill a couple small holes in the link, like the other links have, and greese them like the others, thanks George.

Thank you, George.

Can someone tell me what the purpose of the set screw on the bottom of the main shaft is for, has it something to do with lubrication of the machine?. all three of my machines have it, thanks George.

I have 2 550-b machines and a 650, have had nothing but the upmost help and Warrenty from the people at Dillon, will never buy anything else, and i have had Star Machines, RCBS and others, its Dillon for me, George.

TOLD YOU SO.

One of my 550 Dillons done the same thing, sent it to Dillon, they rebuilt it, like new now, and works perfect, George.

Get it where you want it, and tighten the set screw on the shaft.

I have 2 550B machines, Didnt think i needed a 650, till i bought one, would have nothing else now, the 650 is awesome, greatest thing since Ice Cream, it is a jewel to operate, George.

I set up a Hornady LNL for a friend, and run some rounds threw it, i will keep mr XL650, nuff said, George.

Set up my new 650, what a nice Machine, i have 2 550B machines also, the 650 is the best thing since Ice Cream, i ordered a case feeder, should be here tomarrow, no way iam going to fill those tubes by hand, i used to run Star machines with case feeders, case feeders are a must, thanks Dillon for making a great Machine, George.

The powder funnel, below the powder measure.

I dont think Dillon owns Magma Dannix, i could be wrong, George.

No, but i have installed Dillon on other presses, its been my experiance that if powder dont work well in a Dillon, it wont work in the others either, i am satisfied with Dillon Presses and powder measures, i have three dillon machines and 3 Star machines, Dillon will stand behind everything they sell, and thats no BS, George.

I had the same problem, Dillon sent me the tool to align the press, they said if the link pins are warn, it creats some side to side movement, they said to align the press, and while tighting the screws in the base, to have the handle in the center of the movement, do not tighten the base screws with the handle clear left or clear right, my machine seems to work ok now, they said if the movement in the linkage becomes worse, it will have to be sent to Dillon for repairs, George.