Jump to content
Brian Enos's Forums... Maku mozo!

benny hill

Classifieds
 View Profile  See their activity

  • Posts

    3,085

  • Joined

  • Last visited

 Content Type 

Everything posted by benny hill

  1. benny hill
    9x23 & 38 super will work fine out of the same chamber.
  2. benny hill
    I have seen about a dozen heads blown off the cases in glocks, none in supported chambers.
  3. benny hill
    Like they say, if you can't shoot good at least look good.
  4. benny hill
    About 14 oz's.
  5. benny hill
    Do not use a drill press. It needs to be cut in a mill to control the cuts.
  6. benny hill
    We will be back.
  7. benny hill
    With shooters all up & down the pressure chart on reloading, I think you're nuts not to use a ramped barrel today.
  8. benny hill
    I usually cut them down to about 11oz. With a bushing barrel, you have a lighter gun than a 5" bull. It does everything a 5" does except has a longer sight radius.
  9. benny hill
    I hope she shot a lot of A's for you.
  10. benny hill
    The 38 works great for a 9mm & can be used if you decide to change to 38. two for the price of one.
  11. benny hill
    They are to long for limited div.
  12. benny hill
    You will be glad you brought a scope.
  13. benny hill
    If ext. is installed right, ejt. tuned & ejection port lowered, there should not be a problem.
  14. benny hill
    For $2500.00 I hope it does'nt need a trigger job & such as most do.
  15. benny hill
    No one is allowed to say anything to the shooter dureing a course of fire except the R.O. He can only give the range commands & call hits if asked by the shooter, nothing else.
  16. benny hill
    Call Schuemann & order from him.
  17. benny hill
    Put it where you need it according to the stage.
  18. benny hill
    To that I add, Hi-Viz on all my shotguns, that's what makes horse races.
  19. benny hill
    A 55 does't drift futher or drop more @ 300. Mine shoots 55 blistic tips into 1.7 inches @300. No need for the heavy ones unless knocking down heavy metal.
  20. benny hill
    Bruce, use your irons. have you ever looked through a scope? There is no front post in them & you probley won't know how to use one anyway. See you there.
  21. benny hill
    Proper tuned gun will feed all ammo. The mags need to be checked & feed ramp recut & polished.
  22. benny hill
    With proper mags, the rds should hit in the upper 50% of the feed ramp, if it is not you have a mag problem not a ramp problem.
  23. benny hill
    Put in ISMI springs & make sure the feed lips are set at .380 & you won't have this problem again.
  24. benny hill
    Dot never leaves the scope.
  25. benny hill
    On a 38 super w/ lite bullet & slow powder set up right the dot should not move higher than the neck area w/ a center hold.
×
×
  • Create New...