Jump to content
Brian Enos's Forums... Maku mozo!

4mike

Classified
  • Posts

    105
  • Joined

  • Last visited

Everything posted by 4mike

  1. yes, same construction If you want difference, try JP yellow set of hammer and trigger springs (Brownells 452000007) with red pair of Hiperfire springs
  2. https://www.opticsplanet.com/american-defense-manufacturing-qd-base-for-c-more-rw-crw-arw-trw-ctrw-and-atrw.html https://www.opticsplanet.com/american-defense-manufacturing-ad-rmr-offset-mount.html
  3. https://www.aliexpress.com/item/32982108569.html?spm=a2g0s.9042311.0.0.27424c4d2KOYOy&fbclid=IwAR3sTtXZHVCRqKXBuC57-9MyoF5X7vWKF_04gqaGgOii_5iDfweNBmzImqA with Wolff springs
  4. try 1911 FP spring cut at 0,80 to 0,82" dont know what life time is normal but I run this spring up 10k rnds with hiperfire trigger
  5. I use hiperfire, when lowest part of ramp (because short stroke) not overruning highest poit of hammer, trigger not reseting reliably
  6. http://henkeladhesivesna.com/blog/the-difference-between-red-blue-green-and-purple-threadlockers/ https://www.henkel-adhesives.com/us/en/products/industrial-adhesives/threadlockers.html I have good experiences with 648
  7. just a hardened steel wedge (with radius) weld-on at original ramp (none milled slot) 380g bolt + 150g magnetopneumatic buffer (own construction) rifle spring aluminium spacer + wave (materiál of spacer depend at PF of used ammo - higher loads works better with Delrin spacer) love it
  8. third part is about trigger reseting by cancellation of the bolt ramping
  9. second part useful when the slide stop does not capture bolt just 0.02 " realised by laser weld-on
  10. this is my solution, hope it will will help someone (for Glock magazines) my SS are defined by 4.75 " OAL of compressed buffer + spacer
  11. 4mike

    Red Dot

    HP Jack it depend at the caliber and quality of grip
  12. 4mike

    Red Dot

    offhand shooting from revolver won't shoot to the same point of impact as bench rest my 2 cents
  13. 25-2 = best revo I ever had, You bought well :-)
  14. I made in the past a few simmilar designed hammers under 20g with no problems during using and I believe you can find pictures of even lighter ones here in correct thread
  15. I am the author of a second photo, it is still functional
  16. If somebody are interested, I can provide .dwg or .dxf
  17. i have tried ETM, Tripp, Metalform, DP ETM - terrible load into the gun when is full loaded Tripp - terrible unload from gun when is not total empty Metalform and DP - both same (same tubes, same springs and followers), work flawlessly, no problems with loading or unloading gun (STI-RM)
  18. http://www.midwayusa.com/product/836805/power-custom-complete-screw-kit-smith-and-wesson-pre-1988-3-screw-allen-head-steel-blue http://www.midwayusa.com/product/470805/power-custom-sideplate-screw-kit-smith-and-wesson-pre-1988-3-screw-allen-head-steel-blue?cm_vc=ProductFinding
×
×
  • Create New...