tt350z

Why wont the P+ work with your Lynx belt? I’m using the P+ on my Lynx belt. What gun is your holster for? My Prodigy is pretty loose and rattles quite a bit in my STI/2011 model. It’s not my favorite holster by any means, but thankfully it’s a for a gun I dont shoot often.

That’s the ejector. The cost to get a new one is up to you. I’d personally be annoyed knowing the manufacturer knew they had a bad batch of lowers and still sold them. They should be the ones covering your transfer fee for an in spec lower IMO.

Disregard. Wrong section

@pcar157 Eemantech Ultimate

It’s not that funky. Here’s mine cut from Primary Machine (2 weeks turnaround over Christmas and New Years). Holosun 507 Comp With the SRO mounted

A friend of mine has one. He bought one solely because it’s made in the Phillipines (he’s Filipino). No other reason than that. I took a look at it and it doesn’t get bright enough for me in broad daylight outdoors. It wasn’t Trijicon/Aimpoint/Holosun bright on max brightness. Better options in that price point and footprint.

Got out to range to test out my 14.5” upper with the K lifter installed. Lower has a Tubbs flatwire spring and carbine buffer. Shot 120 round of Fiocchi 115 gr/1200 FPS and 23 rounds of Blazer Brass 147 gr/950 FPS according to the manufacturer. They all shot flawlessly with strong ejection and locked back on an empty mag everytime. The 115 gr shot softer with less muzzle jump than the 147 gr. It was pretty noticeable which was why I didnt bother to shoot anymore 147 gr. Definitely want to try the M and P lifter since the chart in the manual has the 115gr/1200 FPS at that intersection. I love the polymer handguard. It appears to be a glass filled nylon and very closely matches the Gen 1 Magpul UBR, which is highly regarded and being an extremely robust stock. There is no flex to the handguard at all and feels great in the hands. Outside temp was in the low 20°, and it was a pleasure to hold them with my bare hands. https://youtu.be/C5S_hCOHEd8?si=4yT19zVKDwubapoM https://youtu.be/wD8zy2rq1fM?si=_EqVbu_1o7j_q1Ds

I’ve tried the Armanov Spidergo 2, Lok black brass, and aluminum Patriot Defense aggressive high palm swell. My favorite is the Spidergo. It’s texture is on par with the other but I greatly prefer the shape of the Spidergo. The Loks would be second and PD last. My Spidergos are not painted. They are anodized from factory so they are grippy.

Thanks! I’ll let him know next time I see him.

Based on what I’ve seen, a local shooter has an MPA open gun, it’s pretty finicky and the slide to frame fit is just a smidge better than my Prodigy. It’s far behind other 2011’s like a Staccato P, STI Grand Master and Steel Master, Akai, and Venom Custom. Haven’t had a chance to play with an Atlas. The MPA’s magwell fit is also extremely loose and rattles around. If I had the funds, the Venom would be my choice.

They did a SRO cut, Harbinger V1, and cerakote on my slide. They received my slide 12/22/22 and shipped it back 1/6/23. I forgot to weigh my slide before, but slide only with a SRO weighs 12.5 oz.

CGW Pro package with an Eemantech trigger and return spring. I run the #11.5 hammer spring. Sets off Blazer, Federal, Prvi with no issues. I was getting light strikes with Armscor on the DA pull. My Prodigy with #19 hammer spring was failing to set off the Armscor twice as often as my S2 for comparison. All 5 pull average Stock hammer spring DA Stock hammer spring SA CGW #13 spring DA CGW #11.5 hammer spring DA CGW #11.5 hammer spring SA

https://impactcncmachine.com/icm-prodigy-rmr-507-plate/

Just got my Hydra P+ for my Prodigy. Has the new stiffer hanger. You can see the stiffening ribs. Gun fits pretty loose. About 1/8” up and down play and about half of that in every other direction, but the trigger is covered the whole time. Outer shell is different too. You can definitely tell that this one is 3D printed. Only comparable locking holster I have is the Big Dog Steel Carnivore competition holster for my Shadow 2. Much tighter slop free fit while having an even slicker draw and more secure lock. Not a fair comparison as i have it on the Henning T1000 hanger so it basically costs double the Hydra P+.

Just dont stick the hook onto the loop of the innerbelt. Thread the hook portion under the loop so it slides when you ratchet the outerbelt.

You really think a titanium strut is gonna flex so much from from a #17 spring thats it’s gonna be a detriment? Meanwhile titanium valves have #600 springs pushing on it, with a rocker scrubbing the valve tip exerting a side load on the guide isn’t a big deal? Better start preaching to everyone with ti connecting rods is losing performance over steel connecting rids because of the flex. A ti strut is what, $6 more than a steel strut. I’m sure more money is wasted in this sport on dumber things that.

That’s like saying titanium engine valves is a waste of money and steel valves are better for the above reasons. Don’t like it or agree with the marketing. Don’t buy it.

Lighter than steel so faster lock time

Current lightened slide on the right. I bought mine back in May SN 38XXX and it’s the lightened version.

It’s a non-factor in LO if you use a race holster.

My SRO has been solid. Bought it used so not sure what total round count is. I have over 5500 rounds with it. Currently direct mounted on my Shadow 2 with the Primary Machine Harbinger cut so it’s lighter than OEM and has around 2K rounds on it so far.

Never had an issue with the overhang on a Prodigy or P320. What you will notice is the glass will stay clean because all the gas hits the bottom of the SRO. The Staccato plate sits the optic higher than my 2 example though.

They fit easily. I have a TTI 4mm pad and it still fits the gauge with room to spare.

Fits perfect in my buddies Everglades MRH. I’m actually running mine in a Bladetech for a Tanfoglio Stock 2 I had laying around.

That’s a Shadow 2 OR. The back half of the slide is not tri-top and wider than a standard Shadow 2’s slide.