rc51g

Mecklenburg wildlife club. If u want lessons contact Morgan Allen. He will save u a couple years in your training. U can contact me if u have more questions. I think it's great family fun. B warned. It can b addictive.

Hmm. I cleaned the chamber and barrel. I'll check it out for dark spots this evening. Thanks

Actually aftec and egw extractors (I think) and it does it with both

Affect extractor with good tension. Cases are just so tight. I'm getting ready to check it out some more. If I have anymore info I wil post it.

I have a 2005 mat mclearn 38sc open gun. It has a Schumann aet hybridcomp barrel. It has always run well. The other day it started jamming with spent cases left in the chamber. The brass has marks on it from extractor ripping past it. The brass is so tight in chamber that u have to pull it out with pliers or pry it out with screwdriver. At first I that maybe a dirty chamber so I cleaned it but it isn't any better. Cleaned Fired brass is very difficult to push back into chamber. Could the chamber b cracked? I don't see any marks on the brass like a line or anything. They do have a bulge but they always have. Also when this started happening I thot my rounds were too hot. Chonoed the rounds and they were almost minor due to my lack of knowledge of my powder being reverse temp sensitive. I usually run close to 175pf. Now the gun won't run long enough to get through a stage so matches are out. I don't want to send it off quite yet. I was just wondering if anyone had some insight on it or the possibility of a cracked chamber. Thanks

back to the op, I hav been wondering this myself- with help from my new girlfriend. Why? What drives me to constantly think about it and ways to improve? I'm getting to the point now where the constant pressure it puts me under isn't ggod. My job does that enough. I don't really have any down time. I did hav an evening of dry fire the other night that was amazing. I was sick with a cold and had a little antihistamine in me so I was calmer and more relaxed than usual. I got to a point where I could sense the present so well. Not half a second earlier or later. If I moved my focus just the slightest bit things didn't go perfectly. Recently I hav once again thought about quitting and doing something the whole family can take part in. This is supposed to b a hobby and fun. I can tell u though that I love it and the shooters. Even if I don't know them. They r the best group of people I hav ever been around and if I quit, I will miss both. For me, I like to run that perfect stage, beating my friends when they do there best and chasing the "Majestic spark of excellence." I wish you all well.

Alright I finally got to it. I hav a Matt mclearn full size, double sided mount, alum more, svi grip with grip tape, titanium comp. no mags, no bullets. 55.5 oz

had a 6 went to an 8. so there.

yea I agree with a matt. right now im running an SV but I ran real well with a PT alum aggressive texture with no problems. nice and light now but right now im in the mood for heavy. that will change soon im sure. not sure of weight. its a full size with titanium comp but if I get a chance I can weigh it tonight.. btw its a Mat mclearn

20 for me. Just a nice compromise.

I would think u cant go wrong with either one

alum only way to go no matter what it is on

i use svi mags exclusively. i did not do anything to mag release just put a little bevel on the frame so the mag would fit into it. made sure slide would not drag or mag hit the ejector. works great. drops out of my 2 phoenix trinity grips with no drag at all. come to think of it i did smooth out the mag release button holes in the mags but i am like that. everything needs to be smooth or polished.

which carries up to NC. a lot more 38 something. runs like the energizer bunny

they just slide onto an sti frame. my alum was tighter that the SS but both fit perfectly. you cant go wrong

just line the mag up and its fine. there is a lot more room in these grips so the mag is looser. I found the plastic one to drag as well. I have both. a SS with a regular grip that I made into an aggressive texture and an alum that came with the aggressive texture. the alum fits tighter to the frame, enough that have to tap it on. the steel just slid on. now I am running the alum with a ti comp. fabulous products and customer service. I just don't understand how they can make a grip fit so perfectly for a frame they don't have on hand. jm2c

imo, if i get it recoiling to hard i have a tendency to fight the recoil. the load however has to be strong enough to work the comp or else you get a swinging dot and that is hard to time. I just shot when I got home from work with my arms nice and tight and all I saw was a red vertical line. i finally relaxed and the dot tracked better. i like to grip pretty tight but my arms are relaxed. best of luck though.

a girl talking about her open gun. it doesn't get any better than that.

most shooters use daa or cr speed. ghost has some too. guys correct me if im wrong but on the cr speed and ghost you will feel a click on the draw when the holster releases. with the daa master, the pistol is just out and gone. no click feeling. some holsters hold the pistol at trigger guard and comp - others just trigger guard. it is just whatever you like. make sure it is easily adjustable because in open you have more holster positions available. have fun - open is a blast

the Dillon 550B is a great progressive press. if you want even more progressive - go 650 with automatic indexing and case feeder or 1050 with same extras - maybe a bullet feeder too. I dont think you can get much better .

back to the main subject for the OP, i do like the svi grip. it is sort of like the feel of an XDM with that bulge for our palm. there is more contact between your ahnd and the grip. i have not check the distance to the trigger but i would love to find a grip that makes it a little shorter.

sorry for the learning curve ...and the blind hog...

I tried. it said the file is too big. if anyone knows how I would be glad to.

I had mine made in stainless

a matt check email. Im having trouble posting pics on here