Jump to content
Brian Enos's Forums... Maku mozo!

MiChiGunR

Members
  • Posts

    19
  • Joined

  • Last visited

Everything posted by MiChiGunR

  1. I made my own strong mount It was free......
  2. Fed Ex tracking just report 2 boxes dropped of today
  3. Thank you I'm basically wanting the know the footprint to start the riser I wont be drilling any holes till it comes in thanks for the effort That will give me an idea on how big the platform should be
  4. The bottom of the 550 is stepped - at two different levels. Hard to get a mental visual without seeing it... IMO..anyway. Might consider waiting until you see it before going to far with your build... What Merlin is trying to say: Hmm I can use that is there any dimensions there ? The 550 manual says this: " Fig. 1 - Using the machine as a template, mark and drill four 1/4 inch holes allowing 12 inches on each side for your work area. " Go dryfire until you get your press, damit I'm so impatient
  5. The bottom of the 550 is stepped - at two different levels. Hard to get a mental visual without seeing it... IMO..anyway. Might consider waiting until you see it before going to far with your build... What Merlin is trying to say: Hmm I can use that is there any dimensions there ?
  6. The bottom of the 550 is stepped - at two different levels. Hard to get a mental visual without seeing it... IMO..anyway. Might consider waiting until you see it before going to far with your build... kewl thanks for the heads up
  7. I'm making a riser for the press can some give me the footprint dimensions of the 550?
  8. Are they fairly soft? Usually heavier than advertised means they were cast with a mould designed for a slightly different alloy than the one used. The alloy used almost certainly had a higher lead content than the mold was designed for and this less tin and antimony. I am betting they are almost pure lead, and cast pretty hot in order to create that much difference. They should be fine, if they are fairly soft you may have to limit the velocities you push them at. Edited to add: I just saw you included the lube in the stated weight so they may not be pure lead but I would bet still fairly soft Yeh I really dont have an issue with the weight just using them for target but was kind of confused....Should I use some Alox on them still? Just for good measures
  9. I purchased some 10mm cast bullets that was suppose to have the wax melted off of them but they look like they are in good shape......however they were supposed to be 180gr but the show 189.7 including the wax....Is that normal?....
  10. Thats has to hurt nwb01 Posted Today, 10:53 AM Are you interested in giving it a try ? Alot of great clubs and people in these parts ! I would love to but ATM I have no time to do it........I can hardly get to the range..
  11. LM went on Ebay today also..... I ll keep ya in mind Shadow if nothing comes threw on it.....
  12. :surprise: =DIVORCE and your point is? :devil: YOUR RIGHT HEY BRIAN....change my order QUICK
  13. Well I finally said What the hell I purchased a 550 today from Brian......Im exited!!!
  14. They were great vids!!! very informative....
  15. thanks for the welcome guys!!!!
  16. nvm Ill call Brian I should have read the website further.....
  17. G30 here but like someone said above you wont go wrong with any Glock you choose
  18. Same issue here.....I tried from work and worked fine but no activation so no posts.......been a week now and 2 emails no replies...oh well Im here now anyway.....
  19. I used them ...I purchased 2000 45acp for my Glocks never had any lead fowling or any firing issues at all with them.....
  20. Ive been lurking around for a while here and just now registered, its good to see a friendly atmosphere.... ... A little about myself I own a G30,G21c,G20,S&W686,Ruger 44Mag...I reload my own bullets havent started casting yet but would like to.....I look foward to meeting you all..Peace
×
×
  • Create New...