Jump to content
Brian Enos's Forums... Maku mozo!


  • Posts

  • Joined

  • Last visited

Everything posted by tk4

  1. I'm thinking about buying one of these 13.5 barrels. I'm wondering if the gas port is large and I should definitely buy an adjustable gas block for it? If I am planning to run a standard bolt carrier and standard carbine buffer can I use a non adjustable gas block?
  2. I got it used, so I'm not sure how old it is. I will call Apex tomorrow. Thanks.
  3. I have a M&P 1.0. I have installed a Apex flat trigger, Apex threaded barrel, and PMM comp. I am getting a dead trigger about once out of a hundred rounds. Live round feeds, but no click or bang on trigger pull. I can slightly pull the slide back to reset the trigger and fire the chambered round. Any ideas on what is causing this and how to fix?
  4. I am running 23.4gr of 2230. Is it possible it is compressed?
  5. Mine are somewhere in between. I didn't have a glue gun, so I tried the bullet with lapping compound suggested by milanuk. Got the mark closer to the 1st picture. I'll have to shoot some comparison groups. The 68gr wouldn't shoot as well as my Hornady 55gr fmjs that don't get a mark from loading. We will see if the are closer now. Thanks for all the help guys.
  6. I was watching a training vidoe on this that said the Dillon die isn't made for bullets with thin jackets designed for expansion because the edge while seating is too sharp. Do you think the deformation of the jacket will not cause accuracy issues? I've never seen a factory bullet with this seating ring.
  7. I have a Dillon 650, but don't have a lot of rifle reloading knowledge. I am loading a Hornady 68gr bthp bullet and the Dillon seater die is leaving a ring around the bullet jacket where the bullet is depressed. I am learning that I need a different seating die for this type of bullet? Any suggestions on what I can get that will do the job at a reasonable price, and where to get it? Thank you.
  8. tk4

    X5 upper vs legion upper

    Would one allow a lighter recoil spring vs the other?
  9. I'm looking at getting one of the oem complete uppers. Is there any difference between the x5 upper and the Legion upper other than color?
  10. When using 17rnd full size mags in a 2.0C, is it possible to overseat and damage the ejector?
  11. I'm anxious to see how this works out. Would you be willing to sell a few of those plugs?
  12. So, the non camptive spring on the DPM. What other common springs would be compatible diameter wise. Or what would be compatible to change out the stock subcompact spring. I will probably get the stock sig subcompact guide rod, and try to remove the front spring and replace it with something lighter. Would a cut 1911 spring work???
  13. If used for uspsa it would be at local matches, just shooting for hoa, who cares what division. Could possible be used as a duty gun in the future, but not likely. I use a pretty fast powder. I don't shoot too many matches anymore, but when I do it is usually a steel only no pf match. Maybe I will try to modify a stock guide rod assembly. Any suggestions on different springs/spring weights to try for the subcompact setup??? I run a 9lb in my 9mm 2011.
  14. Interesting. I'm debating if I should sell the subcompact Norsso slide I got and take a loss to get a compact slide.
  15. What about the compact slide? Would it work ok with a one piece guide rod and 1911 spring? Would you expect the recoil control of the compact length to be superior to the subcompact?
  16. I have cut down 1911 guide rods and springs to work with 4.25 and 4.5 1911 barrels and slides. I have a ton of 1911 springs to play with. Is there a mechanical reason with the p320 subcompact that it won't work with the 1911 style p320 guide rod???
  17. I may have to try it if there isn't a longer thumb option. Just doesn't make sense to give the trigger finger two jobs in opposing directions when trying to be fast and accurate on the first shot.
  18. Can I get a Springer guide rod designed to work with 1911 springs, and cut it down to length???
  19. I do plan to use the PMM 2 port comp.
  20. I am putting together a p320 with a subcompact slide and compensator. What recoil spring and guide rod setup should I use??? I would like to be able to run 125pf loads. I have also preffered light spring setups on my 2011s. Thanks
  21. Recently picked up a Scorpion. I have short thumbs. I put a Magpul grip on it and replaced the stock thumb safeties with the long PMM thumb safeties. The PMMs are still a little too short for me to flip them reliably. The AK reverse safety doesn't seem like a good option due to the fact that the trigger finger would be moving away from the trigger when it should be getting on the trigger. Any recommendations??? Thanks
  22. Anyone have any opinions of how loud something like this would be with minor reloads, say 125gr around 125pf with a faster powder like CSB1. I assume it would not be anywhere near as loud as a typical open major blaster, but would it be considerably louder than a typical non comped 9mm?
  23. I recently bought some ETS mags, Glock 10mm 20rnders, and a M&P 9 20 rnder. Mine were all junk. So bad I would feel bad about giving them away for free. Like you said, good for malfunction practice only. Too many problems for a practice mag.
  24. Competition, fun, but I want it to be useful for defense also. Doesn't need to be a great performing hollow point, but good accuracy is important. It will likely be shot in an M&P pro, STI, AR 9mm, M&P Shield.
  • Create New...