-
Posts
210 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by gunnerBU
-
-
22 minutes ago, tyman1876 said:
make sure your index finger on your support hand is as high as possible, i.e. tight to the bottom of the trigger guard.
This is one of the most important things I try to do with my grip on any gun, Glock or not.
-
The LimPro doesn't have a full length dust cover, unlike the stock 2 and stock 3. But, I think the LimPro has the same length barrel as the stock 3.
I may may just go with a bladetech made specifically for the LimPro...
-
Anyone know which ghost Thunder will fit the LimPro? Or if I can buy just the ghost hanger?
I like how the grip can be adjusted towards or away from the waist.
-
Looking to get a Ghost Thunder (aka, Stinger) for a limited pro. Does the Stock 2 Thunder fit the Lim Pro? The only Ghost options I see on BSPS are "Stock 2" and "CZ (SP01)/Stock 3/Shadow 2."
I have a bladetech for a stock 2, but the Lim Pro doesn't fit very well.
I searched the forum and google, but couldn't find which Ghost holster will fit the LimPro.
-
Any other leads on a new limited pro (or two)?
I'm sure there's at least one sitting in a shop somewhere.
-
I'm looking for one as well - preferably 9mm. New or used.
http://forums.brianenos.com/index.php?/topic/248642-wtb-tanfoglio-limited-pro-9mm/
-
Donated.
Thank you benos and everyone who contributes here. Without the BENOS forums, I would have never found USPSA and met countless great people and long time friends.
-
How much of the screw should be showing on the backside of the trigger? I adjusted it to wear its not rubbing at all, but the screw might as well not be there.
I'll get a picture up later.
-
Besides, being dangerous, it'll also lead to rounding off the sear, which is also no bueno.
That's what I was worried about...
Thank you. I'll fix it tonight and test fire again tomorrow.
-
I went to the range to function test after adjusting the over travel screw yesterday and it went full auto on me. I finally put some loctite on the over travel screw because it had been backing out on its own. Would putting the screw in too far cause this, or is this something bigger?
I have around 800 rounds through it.
-
I think I'm going to have to wait for some more reviews on them before I get one...
-
Anyone know where to order a "Stinger" from?
+1
-
lugnut -
What front sight height did you get and which rear sight are you using?
Thanks.
-
Done.
You can use google translation to translate the entire site. Not perfect, but understandable.
-
AA&A owner quoted 880fps & 264ftlbs for his 147gr Minor 9mm ammo. What PF does that work out to? Hope this helps..
Ammo shoots well and i get next day delivery living SC
That works out to be 129pf.
ETA: I know they used to test with a Glock 17. Do you know if this info is using a Glock or CZ?
-
Does anyone else have experience with AAA below 130PF out of a Shadow?
I have been using AAA out of my glock for 3 years. Just wondering if I can continue to use it in the Shadow.
-
For those that have tried the Diamond backs, how do they compare to the tactical diamond grips?
+1.
I have the AL grip tape ones right now, but they do not provide near enough grip. The gun moves around in my hand too much for me to be comfortable. Looking for something that will hold the gun still in my hands.
-
Shadow Sights
in CZ
And which Dawson front sight height is needed for a SP01 Shadow with the CZC competition rear?
I am looking for an all black front that is thinner than the FO sight that came on the gun.
-
Congrats Ben!!
You have definitely earned it!
-
Check the website. I think it re-airs on wednesday or something.
ETA: From the website:
The Long Shot: Tuesday, Jun 8, 10/9c
The Long Shot: Wednesday, Jun 9, 8/7c
-
Thanks Paul!!
-
Technically, it's the MR (no LA any more) location, but per 8.3.1.1 you may move from the start location with the permission of and under the direct supervision of the RO.
Rule 8.3.1.1 applies, but it states that the competitior must not move after the make ready comand. If you look up movement in Appendix A3, movement is defined as taking MORE THAN ONE step in any direction. So, technically, you can take ONE step after the "Make Ready" command without permission.
But...its probly always best to just ask the RO.
ETA: we went over this in my RO class.
I dryfire one shot (glock) and then take a sight picture of the next 2 or 3 shots if they can be seen. If I can't see anything, I still draw, dryfire, and see a PERFECT sight picture (on a wall, berm, etc.)...just like the one I want to see for every shot of the stage.
-
I've shot both and personally I don't know how anyone could go to the narrower rear .115 - .130 notch's after looking at a set of Warren's with their rear notch's at .150 as well as being cut deeper...
I personally shoot very accurate with the narrow rear notch (from the lower tolerance in "error" with front sight movement). A lot more accurate than I did with the Sevigny rear. I't doesn't slow me down at all because when I index on target, my front sight is ALWAYS partially in the notch (muscle memory).
The best thing to do is try the sights out and see if they WORK FOR YOU. That is the main thing, you can't base what will work for you off of another person's opinion.
-
I've never used an adjustable rear, but I've used both Warrens and Dawsons.
When I was shooting Limited with a G35, I used the Warren/Sevigny set up with FO front. I liked the sights, but the front sight was a little taller than what I am using now. I wanted to try out an all black front, so I switched to a Dawson front and rear. My rear sight has a .115 notch (the more narrow of the 2 Dawsons). I absolutely love these sights and can't see myself changing the set up anytime soon. The Warren rear had a wider notch, but I personally like the Dawsons better.
FWIW, Dawson also makes a .125 notch rear.
ETA: I shoot only Production now.
Looking for Limited Pro
in Tanfoglio (EAA / IFG)
Posted
I think @MemphisMechanic meant to post this here: