Rudukai13 Posted March 7, 2018 Share Posted March 7, 2018 Let's get this started. Post pictures of your setup, include a list of mods, what division you shoot it in if it's for competition, etc. *Any configuration utilizing a P320 FCU is welcome to post, not just competition setups* This space reserved for the shiny new X-Carry and Romeo1 waiting at my local FFL to pick up this Friday... Link to comment Share on other sites More sharing options...
rocket99 Posted March 7, 2018 Share Posted March 7, 2018 X5 with Gray Guns competition flat trigger kit and Fat guide rod/12.5# Spring. Also a shitty grip tape jobSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Rjracing Posted March 7, 2018 Share Posted March 7, 2018 Sig P320 X-Five -Vortex Viper red-dot optic -GrayGuns PELT2 Trigger Kit with full FCU polish pulling at 2.7lbs -Springer tungsten guide-rod with 13lb recoil spring -Springer 140mm 17rd extended basepads x4 -Springer extended mag release -Springer grip tape -Raised under trigger undercut Link to comment Share on other sites More sharing options...
lacivilian Posted March 7, 2018 Share Posted March 7, 2018 35 minutes ago, Rjracing said: Sig P320 X-Five -Vortex Viper red-dot optic -GrayGuns PELT2 Trigger Kit with full FCU polish pulling at 2.7lbs -Springer tungsten guide-rod with 13lb recoil spring -Springer 140mm 17rd extended basepads x4 -Springer extended mag release -Springer grip tape -Raised under trigger undercut Shooting USPSA or 3gun? If USPSA, leaving the magwell on moves you to Open, just a friendly heads up. Link to comment Share on other sites More sharing options...
Rjracing Posted March 7, 2018 Share Posted March 7, 2018 1 hour ago, lacivilian said: Shooting USPSA or 3gun? If USPSA, leaving the magwell on moves you to Open, just a friendly heads up. Yeah, I shoot 3gun, USPSA and IDPA. For IDPA and USPSA the magwell comes off, for IDPA I also have to put my SS guide rod, 17rd mags and factory trigger back in too. Part of what I love so much about this gun is how versatile it is, within a minute or two I can have it changed around to compete in so many different classes throughout all the practices. Link to comment Share on other sites More sharing options...
Daemunx1 Posted March 8, 2018 Share Posted March 8, 2018 (edited) 6 hours ago, lacivilian said: Shooting USPSA or 3gun? If USPSA, leaving the magwell on moves you to Open, just a friendly heads up. Actually unless I'm mistaken the magwell only sends you to limited in USPSA. It's only prohibited specifically in production. https://uspsa.org/viewer/Feb_2014_Handgun_Rules.pdf Edited March 8, 2018 by Daemunx1 Link to comment Share on other sites More sharing options...
Daemunx1 Posted March 8, 2018 Share Posted March 8, 2018 (edited) Not an actual picture just yet, just a photoshop mockup on a cerakote job I'm considering doing later this year. Edited March 8, 2018 by Daemunx1 Link to comment Share on other sites More sharing options...
Rjracing Posted March 8, 2018 Share Posted March 8, 2018 1 hour ago, Daemunx1 said: Actually unless I'm mistaken the magwell only sends you to limited in USPSA. It's only prohibited specifically in production. https://uspsa.org/viewer/Feb_2014_Handgun_Rules.pdf You can't run an optic in limited and if I were to remove it I would be at even more of a disadvantage running 9mm (minor) in that division too. Link to comment Share on other sites More sharing options...
Daemunx1 Posted March 8, 2018 Share Posted March 8, 2018 5 minutes ago, Rjracing said: You can't run an optic in limited and if I were to remove it I would be at even more of a disadvantage running 9mm (minor) in that division too. Gotcha, didn't think about the optic being on there just the magwell in general. Link to comment Share on other sites More sharing options...
Rudukai13 Posted March 8, 2018 Author Share Posted March 8, 2018 13 hours ago, Daemunx1 said: Not an actual picture just yet, just a photoshop mockup on a cerakote job I'm considering doing later this year. Looks pretty good! Anyone have a slide that's been heavily machined yet? Would like to start seeing some of these that have some fairly heavily custom personalization mods done... Link to comment Share on other sites More sharing options...
Rudukai13 Posted March 10, 2018 Author Share Posted March 10, 2018 It stayed unmodified for precisely three minutes once I got it home Link to comment Share on other sites More sharing options...
Rudukai13 Posted March 31, 2018 Author Share Posted March 31, 2018 I'm thinking I need the compact grip module for this to work as a carry gun...And a smaller flashlight Link to comment Share on other sites More sharing options...
Akkid17 Posted April 3, 2018 Share Posted April 3, 2018 What modifications did you do to it? Link to comment Share on other sites More sharing options...
Rudukai13 Posted April 4, 2018 Author Share Posted April 4, 2018 (edited) Right now basically what you see is everything I've done - Romeo1, Surefire, magazine extensions, magwell. I have a thread in the Sig-specific area with more pictures and will be detailing what else I do there. Additional parts currently on order include a Bar-Sto threaded barrel and Springer Precision compensator. I will probably get a trigger upgrade next, once I decide which one I want to go with... Edited April 4, 2018 by Rudukai13 Link to comment Share on other sites More sharing options...
Rudukai13 Posted April 14, 2018 Author Share Posted April 14, 2018 If anyone wants to know how to turn their OEM 21 round magazine into a reloadable 27 round magazine (that I THINK fits a 170mm gauge, but not confirmed), check out my "Project Nemesis" thread in the Sig sub-forum; Link to comment Share on other sites More sharing options...
terrydoc Posted May 28, 2018 Share Posted May 28, 2018 Is the X5 set up for any particular sight? Link to comment Share on other sites More sharing options...
Rudukai13 Posted June 16, 2018 Author Share Posted June 16, 2018 On 5/27/2018 at 6:14 PM, terrydoc said: Is the X5 set up for any particular sight? Yes, it's cut to run a Sig Romeo1 optic, but Springer Precision makes adapter plates for all the other popular pistol optics on the market; https://shop.springerprecision.com/category.sc?categoryId=89 Link to comment Share on other sites More sharing options...
Rudukai13 Posted June 16, 2018 Author Share Posted June 16, 2018 The loctite is drying... Link to comment Share on other sites More sharing options...
terrydoc Posted June 18, 2018 Share Posted June 18, 2018 Would I be correct in assuming the cut on the 320 RX and the cut on the X5 is the same? So if I bought a plate I would be able to use other sights on the RX? Link to comment Share on other sites More sharing options...
Rudukai13 Posted June 18, 2018 Author Share Posted June 18, 2018 8 hours ago, terrydoc said: Would I be correct in assuming the cut on the 320 RX and the cut on the X5 is the same? So if I bought a plate I would be able to use other sights on the RX? Not necessarily. They are both cut to accept a Romeo1 footprint and bolt pattern, but the cut on the X-Five extends all the way to the rear of the slide. On the RX pistols, the cut stops at the rear of the R1 footprint, which allows you to keep the dovetail for your rear iron sight. A plate for the X5 might work for the RX, but I can't say for certain... Link to comment Share on other sites More sharing options...
Rudukai13 Posted June 18, 2018 Author Share Posted June 18, 2018 Pic thread... Link to comment Share on other sites More sharing options...
Wisemenofgotham Posted June 18, 2018 Share Posted June 18, 2018 (edited) P320 X5, ROMEO1 3MOA, GrayGuns black FAT guide rod, ISMI 14lb recoil spring, Surefire X300U-B Edited June 19, 2018 by Wisemenofgotham Link to comment Share on other sites More sharing options...
Wisemenofgotham Posted June 18, 2018 Share Posted June 18, 2018 (edited) P320c OD Green 9mm, custom stippled frame, Apex flat trigger, Trijicon RM06 (milled by L&M Precision), Ameriglo sights, Surefire XC1, Springer Precision 140mm magazine extension: Edited June 19, 2018 by Wisemenofgotham Link to comment Share on other sites More sharing options...
Rudukai13 Posted June 18, 2018 Author Share Posted June 18, 2018 (edited) 2 hours ago, Wisemenofgotham said: P320 X5, ROMEO1 3MOA, GrayGuns black FAT guide rod, ISMI 14lb recoil spring, Surefire X300U-B 1 hour ago, Wisemenofgotham said: P320c OD Green 9mm, custom stippled frame, Apex flat trigger, Trijicon RM06 (milled by L&M Precision), Ameriglo sights, Surefire XC1, Springer Precision 140mm magazine extension: I don't see the pictures for either post? Just out of curiosity, why did you go with the RMR on your Compact as opposed to a R1? ETA: Picture for pic thread; Edited June 18, 2018 by Rudukai13 Link to comment Share on other sites More sharing options...
Wisemenofgotham Posted June 19, 2018 Share Posted June 19, 2018 I've updated the links, I hope the pictures work now. I went with the RMR for my old EDC because I felt it was more up to the task versus the ROMEO1, which I prefer for competitive shooting/range. I consider the Trijicon RMR a "go to war optic". Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now