leeshall Posted March 2, 2018 Share Posted March 2, 2018 Will the Dillon small powder bar reliably dispense Bullseye and similar pistol powders at 2 to 2.5 grains or less or do I need to get the extra-small powder bar? This will be for small pistol cartridges like 32 S&W Long and 380 ACP. Link to comment Share on other sites More sharing options...
AHI Posted March 3, 2018 Share Posted March 3, 2018 The lowest I have went was 2.4 for 38spl . I know some one who loads 32 but they use vn310. he only uses the dillon small powder bar. Link to comment Share on other sites More sharing options...
pskys2 Posted March 3, 2018 Share Posted March 3, 2018 the dillon powder bar listed as x-small or extra small has a different cut on the corners. helped get my clay loads down to 2.7 grains consistently. Link to comment Share on other sites More sharing options...
GeneBray Posted March 3, 2018 Share Posted March 3, 2018 Wrong place to ask. Contact Dillon.Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
AHI Posted March 5, 2018 Share Posted March 5, 2018 This is the Right place to ask the people who actually use it. Link to comment Share on other sites More sharing options...
dillon Posted March 5, 2018 Share Posted March 5, 2018 For powder charges under2.6-2.7 grains, you will need the Extra Small powder bar, atock# 20780 Link to comment Share on other sites More sharing options...
Banacek Posted March 5, 2018 Share Posted March 5, 2018 I would get the Uniquetek micrometer bar, you will be glad that you did but confirm with them that it will indeed dial down that low, I have not tried something that light with mine. Link to comment Share on other sites More sharing options...
leeshall Posted March 6, 2018 Author Share Posted March 6, 2018 The Uniquetek micrometer bar costs $130! Yikes! Link to comment Share on other sites More sharing options...
GeneBray Posted March 7, 2018 Share Posted March 7, 2018 Believe that is the Arredondo one. Uniquetek has has there own that is cheaper Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
MikeyScuba Posted March 8, 2018 Share Posted March 8, 2018 I have the Arredondo one, it works GREAT! I load 2.7g N320 for ICORE 9mm loads. I also added the mircometer all my other bars. It's one of the best upgrades I done to my 650. It's just so easy to dial in. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now