CTJer Posted February 12, 2018 Share Posted February 12, 2018 Made my first small batch of 9mm. 147g H&S over 3.2g of Tightgroup @ 1.100 OAL. (Anything bigger wouldn’t pass the plunk test in my G17) Haven't gotten to the range to test, but manually cycling the slide gets me a double feed on the last 2 rounds. Tried a few different mags to see if that was the issue. Any thoughts for a newbie reloader? Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted February 12, 2018 Share Posted February 12, 2018 2 minutes ago, CTJer said: manually cycling the slide gets me a double feed on the last 2 rounds. Tried a few different mags to see if that was the issue. Sounds to me, like it has to do with your mag springs ... Link to comment Share on other sites More sharing options...
CTJer Posted February 13, 2018 Author Share Posted February 13, 2018 Well, i got to the range on my way out tonight and didn’t have that issue. I’ll load another small batch and run’em again. Pleased that my first rounds all fired.....and shot the same. Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted February 13, 2018 Share Posted February 13, 2018 Sounds like you were cycling the slide too gently An actual explosion inside the chamber solved all your problems Good luck. Link to comment Share on other sites More sharing options...
CTJer Posted February 13, 2018 Author Share Posted February 13, 2018 3 hours ago, Hi-Power Jack said: Sounds like you were cycling the slide too gently An actual explosion inside the chamber solved all your problems Good luck. Link to comment Share on other sites More sharing options...
g mac Posted March 19, 2018 Share Posted March 19, 2018 You could probably lower your load to 3.0grs TG with that OAL and still be way over minor. I use 1.145-1.150 oal n still makes 131PF Link to comment Share on other sites More sharing options...
gsc0tt Posted March 22, 2018 Share Posted March 22, 2018 use apex extractor and change the ejector to a gen4 (there is also another oem glock part listed that you need on the apex website) My 19 is no 100% after this, it would 50/50 choke and puke if you would load one round in the gun and shoot it without a mag inserted Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now