stardust tommy Posted December 31, 2017 Share Posted December 31, 2017 I had a customer with a custom build with SVI parts, I looked at the hammer/sear under a microscope and noticed a strange engagement... normaly the tips of the hammerhooks rest on the primary face of the sear, and you cut a secondary angle. on this gun the searnose was smaller, had a small primary cut and a large secondairy. the hammerhooks were as high as the searnose. so the sear has to travel a verry small distance. this was not a factory SVI so I don't know if this is standard gr T Link to comment Share on other sites More sharing options...
digi531 Posted January 3, 2018 Share Posted January 3, 2018 Sounds like a smith did his own version of sear / hammer engagement. And if it works and is safe then why not, especially if the trigger is sweet with that setup. Link to comment Share on other sites More sharing options...
yigal Posted January 3, 2018 Share Posted January 3, 2018 (edited) can u make a pic. hammer with sear engagement on this gun? Edited January 3, 2018 by yigal Link to comment Share on other sites More sharing options...
RGC Posted January 4, 2018 Share Posted January 4, 2018 Yes a pic would be great.... Link to comment Share on other sites More sharing options...
stardust tommy Posted January 5, 2018 Author Share Posted January 5, 2018 I'll try to mak a drawing, don't have the gun anymore... Link to comment Share on other sites More sharing options...
yigal Posted January 5, 2018 Share Posted January 5, 2018 1 hour ago, stardust tommy said: I'll try to mak a drawing, don't have the gun anymore... o.k. wait to see this . Link to comment Share on other sites More sharing options...
kimberacp Posted January 8, 2018 Share Posted January 8, 2018 could that be a sear cut with the True Radius jig? Link to comment Share on other sites More sharing options...
ltdmstr Posted January 8, 2018 Share Posted January 8, 2018 Was probably done on a Power Custom fixture, which allows you to adjust the angle and width of both the primary and secondary surfaces. Less engagement is not a problem as long as it's done properly and passes all function and safety checks. Link to comment Share on other sites More sharing options...
yigal Posted January 9, 2018 Share Posted January 9, 2018 maybe . us market known for many creative good gunsmiths . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now