tires2burn Posted December 17, 2017 Share Posted December 17, 2017 I want to attach my case feeder to the wall for better support. Any simple ideas or pictures would be appreciated. Link to comment Share on other sites More sharing options...
stick Posted December 17, 2017 Share Posted December 17, 2017 (edited) What's wrong with the Dillon mount? Mine doesn't move at all. Edited December 17, 2017 by stick Link to comment Share on other sites More sharing options...
Sarge Posted December 17, 2017 Share Posted December 17, 2017 9 hours ago, tires2burn said: I want to attach my case feeder to the wall for better support. Any simple ideas or pictures would be appreciated. Just a 1” pipe flange s tweed to a stud in the wall. A few sections of threaded pipe and a 90 degree elbow and you are all set. But if your bench is solid you can do better by putting the flange on bench and running a straight pipe up to mount case feeder. Then tie a brace into the wall for rock solid mounting. I did the latter Link to comment Share on other sites More sharing options...
SGC Posted December 17, 2017 Share Posted December 17, 2017 I used pipe hangers and threaded rod which only cost a few dollars from lowes. Went from having 1-2 upside down cases per hundred, to none in the last 1500 or so. Sent from my Nexus 5X using Tapatalk Link to comment Share on other sites More sharing options...
tires2burn Posted December 17, 2017 Author Share Posted December 17, 2017 Upside down cases are the reason I want to try this. I get maybe 1 in 400 but I want to try and eliminate the problem. Thanks and Merry Christmas to all. Link to comment Share on other sites More sharing options...
Sarge Posted December 17, 2017 Share Posted December 17, 2017 I ended up doing the same with the bullet feeder. Link to comment Share on other sites More sharing options...
tires2burn Posted December 17, 2017 Author Share Posted December 17, 2017 Simple and functional. Link to comment Share on other sites More sharing options...
indy1k Posted December 28, 2017 Share Posted December 28, 2017 Great idea have an older bullet feeder that mounts to the bracket and that will make it much more rigid thank you Link to comment Share on other sites More sharing options...
Austings Posted January 12, 2018 Share Posted January 12, 2018 On 12/17/2017 at 11:40 AM, Sarge said: I ended up doing the same with the bullet feeder. I am going to try and replicate this. I do t have upside down case issues very often, but I would like it to be a little more stable. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now