jimbullet Posted August 6, 2017 Share Posted August 6, 2017 Just looking at the logic behind. I have heard and have been following the concept that if I were to lighten the slide, say make it tri top, some lightening cuts/ serrations to reduce reciprocating mass and weight, that given the lighter mass, I now need to reduce the recoil spring weight to make the gun track and return after every shot. Is it correct to say that the lighter the slide, the recoil spring should be lighter ? Link to comment Share on other sites More sharing options...
MisterCoffee Posted August 6, 2017 Share Posted August 6, 2017 I don't know about 2011s, but there are a couple of guys over at BHSpringSolutions dot com who have put some thought into spring combinations and slide timing. You may want to go over there just for some ideas. They have videos, text, spring kits (for 1911s), etcs. As I understand things, you have to consider not just the recoil spring, but the main spring and firing pin spring, as well. Link to comment Share on other sites More sharing options...
MikieM Posted August 14, 2017 Share Posted August 14, 2017 Yes, you can install a lighter recoil spring after your slide has been lightened, but the action of the slide on your gun is more complicated than that. Link to comment Share on other sites More sharing options...
BeerBaron Posted August 21, 2017 Share Posted August 21, 2017 As a basic rule the lighter the slide the lighter the recoil spring. It works as a system in partnership with hammer spring and firing pin stop plate radius. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now