RJH Posted June 14, 2013 Share Posted June 14, 2013 I was looking for a minor load for my G35 in production. I will be using Titegroup and 175grn LTC. Before I started experimenting I thought I would ask on here and see if anyone had gone through that headache before me. Thanks. Link to comment Share on other sites More sharing options...
PKT1106 Posted June 14, 2013 Share Posted June 14, 2013 I would start with 2.9gr and go from there. My XDM runs with 3.2gr and 180gr Rainiers at about a 130PF seated at 1.125" Link to comment Share on other sites More sharing options...
RH45 Posted June 16, 2013 Share Posted June 16, 2013 Titegroup is going to smoke a lot behind lead bullets. Even though it is temperature sensitive, I'd go with about 3 grains of Clays. Link to comment Share on other sites More sharing options...
RJH Posted June 17, 2013 Author Share Posted June 17, 2013 Titegroup and cast is all I have ever used. How much less does Clays smoke? I may try it next time. Link to comment Share on other sites More sharing options...
tictactician Posted June 18, 2013 Share Posted June 18, 2013 Titegroup at the minor load charges started to open up quite a bit on the extreme spread between rounds. +1 for around 3 grains of clays. I have read of some using WST as well. Link to comment Share on other sites More sharing options...
bulm540 Posted June 19, 2013 Share Posted June 19, 2013 Loading 2.9 to 3.0 0f clays with 180 molys. Nice soft load. Link to comment Share on other sites More sharing options...
onebadeye Posted June 19, 2013 Share Posted June 19, 2013 Can't beat 2.8- 3.0 clays 3.0 with 180 zero at 1.130 gives me a 128pf. With my g35. Link to comment Share on other sites More sharing options...
RH45 Posted June 19, 2013 Share Posted June 19, 2013 Titegroup and cast is all I have ever used. How much less does Clays smoke? I may try it next time. I don't use lead anymore, but, Titegroup is about the hottest powder there is, so it should be the smokiest. Link to comment Share on other sites More sharing options...
BobS761 Posted June 20, 2013 Share Posted June 20, 2013 Clays is A LOT less smokey than TG. I use cast bullets. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now