SirLoin Posted October 1, 2011 Share Posted October 1, 2011 Loaded some .40 S&W Minor ammo using Titegroup, chrono'ed it, and did some analyses. Figured I'd share it here in case folks would find it helpful. Info is in attached PDF file. Cheers. Titegroup Reload Data.pdf Link to comment Share on other sites More sharing options...
RH45 Posted October 1, 2011 Share Posted October 1, 2011 Loaded some .40 S&W Minor ammo using Titegroup, chrono'ed it, and did some analyses. Figured I'd share it here in case folks would find it helpful. Info is in attached PDF file. Cheers. Those velocities seem pretty high. How short are you loading to?? Link to comment Share on other sites More sharing options...
RePete Posted October 1, 2011 Share Posted October 1, 2011 Mr Loin: Your results almost mirror mine that were fired from anSTI Trojan. 3.3gr/TG gave me a PF of 137800 vs your 133900. I did a 3.6gr/TG and got a PF of 149000. Link to comment Share on other sites More sharing options...
SirLoin Posted October 1, 2011 Author Share Posted October 1, 2011 Hi RH45, OAL is 1.125 Cheers. Loaded some .40 S&W Minor ammo using Titegroup, chrono'ed it, and did some analyses. Figured I'd share it here in case folks would find it helpful. Info is in attached PDF file. Cheers. Those velocities seem pretty high. How short are you loading to?? Link to comment Share on other sites More sharing options...
SirLoin Posted October 1, 2011 Author Share Posted October 1, 2011 Hi RePete, Good to hear we're in the same range. What bullets do you use? I assume you're using 180 gr bullets? Cheers. Mr Loin: Your results almost mirror mine that were fired from anSTI Trojan. 3.3gr/TG gave me a PF of 137800 vs your 133900. I did a 3.6gr/TG and got a PF of 149000. Link to comment Share on other sites More sharing options...
RePete Posted October 1, 2011 Share Posted October 1, 2011 Hi RePete, Good to hear we're in the same range. What bullets do you use? I assume you're using 180 gr bullets? Cheers. Mr Loin: Your results almost mirror mine that were fired from anSTI Trojan. 3.3gr/TG gave me a PF of 137800 vs your 133900. I did a 3.6gr/TG and got a PF of 149000. My bad, 180 Frontier CMJ loaded to 1.115" Link to comment Share on other sites More sharing options...
RH45 Posted October 2, 2011 Share Posted October 2, 2011 I figured they had to be shorter than mine. I load to 1.2". Hi RH45, OAL is 1.125 Cheers. Loaded some .40 S&W Minor ammo using Titegroup, chrono'ed it, and did some analyses. Figured I'd share it here in case folks would find it helpful. Info is in attached PDF file. Cheers. Those velocities seem pretty high. How short are you loading to?? Link to comment Share on other sites More sharing options...
SirLoin Posted October 4, 2011 Author Share Posted October 4, 2011 How much lower PF are you getting by going to 1.2" compared to my PF numbers? I'm keen to find out how much OAL affects PF. I figured they had to be shorter than mine. I load to 1.2". Hi RH45, OAL is 1.125 Cheers. Loaded some .40 S&W Minor ammo using Titegroup, chrono'ed it, and did some analyses. Figured I'd share it here in case folks would find it helpful. Info is in attached PDF file. Cheers. Those velocities seem pretty high. How short are you loading to?? Link to comment Share on other sites More sharing options...
RH45 Posted October 6, 2011 Share Posted October 6, 2011 My IDPA load for my STIs is 3.7 grains of Titegroup, behind a Zero, 180 grain, jhp, with OAL of about 1.2". PF hovers around 135. I don't remember exactly, but, I remember that one of my Trojans is a little slower than the other one, and my Eagle. Link to comment Share on other sites More sharing options...
sbo76 Posted November 5, 2011 Share Posted November 5, 2011 4.7tg with a Montana Gold 180gr JHP and 1.190 makes a 172ish in my 5" very consistently. Link to comment Share on other sites More sharing options...
D roc Posted November 6, 2011 Share Posted November 6, 2011 some of my data power factor and reloading table.pdf Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now