jedb

Winning is a by product of most of the things mentioned in some of the latest threads. Training on the proper techniques, mental conditioning and practice. You can train to win battles but the war or being best in the world is most times out of our control.

Does the thumb safety work without the slide on? If not then the safety is not fitted properly. I took it apart and the safety works OK with the slide off. So does that mean the notch in the slide is the problem?

As far as having the MSDS's for the ingrediants on sight for your employees, you should. OSHA can always sight you under the General Duty Clause. As far as your end users if they are using it in small amounts, IE clean a firearm with, the warnings or MSDS info contained on the container it is puchased in is usually adequate. Check out a can of WD-40 you will see a basic MSDS right on the container.

The thumb safety gets stuck in the up position and I can't get it to release. I have put 2 different safeties on it but they both do the same thing Any help appreciated.

22 cal. won't quite do it, but 40 and 10mm do just fine. I did it to mine and it wasn't because I had a replacement. Hope this helps.

It's a Bushmaster Carbon AR-15. I had more trouble with the white box Winchester than with a box of Wolf I had with me at the time.

I test drove this AR last evening, it would run for 5 or 6 rounds then fail to feed the next round. I tried 3 different mag brands, the OK brand was the most reliable. This is chambered for the 5.56 nato round and I was shooting .223, could this have been an issue? Any help appreciated.

Has anyone had this problem with the Champion, the slide locks back before the mag is empty. It happens with 10 and 7 rd. mags, and 230 grain rn ammo. A mag problem, recoil spring, or what? Thanks for any help.

Well he took his 45 XD out and took one that weighed approx. 800 lbs, the first shot did bounce off of the skull which caused a little excitement but he got it down and it's now in the smoke house. Thanks guys for the advice and stories.

Who is currently making speedloaders for the 10 shot 617. Just got one and have a bunch of ammo to burn. Thanks guys

My son is going on a pig hunt going to be shooting probably inside of 50 yds. Anyone out there ever shot one with a 45 acp? I am concerned about penetration of the hide with a 900 fps load. Thanks

I expirimented with wearing both lenses and then took the left one out and now just shoot with one in the right side for the front sight. Might be worth a try.

The last one I seen was a 22 long rifle but it was at Impactguns.com. I am not sure if they have any more at this time though.

The accura bullets are .399 - .400 in diameter and average .717 in length.

Thanks Raul, I will take some measurements tonight. Just test fired a couple of rounds, doesn't feel too bad. Thanks again Shoot fast accuracy will come!