Jump to content
Brian Enos's Forums... Maku mozo!

steved57

Members
  • Posts

    5
  • Joined

  • Last visited

Profile Information

  • Real Name
    Steve Davison

steved57's Achievements

Looks for Range

Looks for Range (1/11)

  1. Hey Grumpy I'll definitely not shoot them !
  2. Don't say none of your business as I appreciate the advise from you experienced reloaders
  3. You guys were totally correct as I set die as everyone above has suggested and that did the trick Thanks for all the input/advice I'm sure I'll have more questions as I move along but again thanks guys
  4. Okay - I didn't think it was supposed to look like that and I'll try your suggestions and I'll report back I meant to say I am using the Dillon die that came with the Dillon 550 Thanks again guys !!
  5. Okay - First off I hope I am posting this in the correct spot - secondly I am new to reloading (reloaded 40 years ago) so anyway I have a Dillon 550 and set it up as per the instruction manual I loaded a dozen .357 magnum and shot some of them and all seems fine - but then I noticed I can spin the bullet in the case - I can't pull it out but can spin it - and I don't think the case looks correct from what I remember many years ago So I am using new Winchester brass, Hornady 125 g xtp bullets, 18.4 grams Winchester 296 ball, COL is 1.580, and CCI 500 small pistol primers So after I run the brass thru the resize die it is .375" , I am flaring .020" per Dillon manual and set crimp die per manual which is run down to touch shellplate and then 1/8 turn more Any help / suggestions would be very much appreciated See attached pic of the finished round with the shoulder approx. at base of bullet
×
×
  • Create New...