Jump to content
Brian Enos's Forums... Maku mozo!

dwfish

Members
  • Posts

    15
  • Joined

  • Last visited

Profile Information

  • Real Name
    Dwfish

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

dwfish's Achievements

Looks for Range

Looks for Range (1/11)

  1. STATION 2 AND 1 but i TOOK THE DIE PLATE TO THE SHOP AND MILLED .050 OFF THE RIGHT SIDE AND OF EVERY SERFACE THAT CURVES. PUT IT IN AND DRILLED THE PIN HOLES,
    1 AND dONE. pERFECT ON BOTH STATIONS.

    oopS.

    Blessings

    thumbnail.jpg

  2. sO, HOW DID YOU GET YOUR STATION 1 TO LINE UP.???

     

  3. I WON, I modafied the tool head and my 650 works like it should.!!!!!!!!!!

    1. dwfish

      dwfish

      MAN O MAN I am making great bullets .!!!!!!!!!  Figured out the 650 dillon.  Milled about .050 off the left side of the die plate and redrilled the pin holes forward about 3/4 inch. WORKS GREAT. BULLETS ARE COMING OUT LIKE NEW.
      dwtroll@YAHOO.COM

    2. dwfish

      dwfish

      MAN O MAN I am making great bullets .!!!!!!!!!  Figured out the 650 dillon.  Milled about .050 off the left side of the die plate and redrilled the pin holes forward about 3/4 inch. WORKS GREAT. BULLETS ARE COMING OUT LIKE NEW.
      dwtroll@YAHOO.COM

      thumbnail - Shortcut.lnk

  4. DO NOT shoot high primers in ANY gun. BOOM possible or will lock the gun up.!!
  5. thanks would it be the same by tightening the x bolts.??
  6. I put a little bend in the bottom 1/4 in of the case feed shut off switch bar. Worked great. Bent it DOWN to the right. Lets it go up a little farther but does not hang up on the feed tube. I also put a big champher on the top INSIDE of the tube.
  7. Changed tool heads 7 time this last week. All are the same. Changed platform twice SAME.
  8. If anyone has had this problem please holler. If you will look at the Picture to the left I am having problems getting MY Dillon to line up with the cases. I have spent 20 hours checking and re checking. I had the local pro stop over and he just scratched his head. I have changed every part and timed the machine every time. This is happening on ALL cal. we have used. Could you guys look at your press when loading, check station 2 powder/flaring action. Just as the cases come into contact with the flare tool there is a miss alignment on MINE. Would just love some feed back on if your cases tilt to the left as the tool goes into case. I found a way to solve this problem but Dillon is focused on the alignment tool and not the problem/solution . They think it is an alignment problem and it is NOT. Their tool only adjusts Orientation of the platform and the tool head. After doing the (alignment) with their tool 20 times with all my cal.s I find that if I take out the front Tool head pin and push the thing in .019" all is good. BUT with the tool head pushed over I can not get their ALIGNMENT TOOL TO WORK.???????? I am just putting a C clamp on the toolhead and life is GOOD. Thanks for any Ideas Thanks for checking you machines. PS I love Dillon and all but 1 guy there. Bless N zzzzzz
  9. You can HAND prime your cases and take out the DEprimer. EASY to do and I buy some primed cases and it is GREAT. Check that there are no spent or live primers under your platform as this will make things tough to prime on the up stroke. These machines are wonderful and there are little things that we wish were different BUTT here we are. I have had spent primers build up under my press for reasons I can not explain. With the primer assy. off you can get right in there and CLEAN the spent primer shout. On the # 2 check for deformation on the little red liner for the case feed and the Big plastic tube adapter. Remove SAME and check for ease of movement in these and you could do a test and don't load just rune a few thru watching the operation of each item mentioned. Do you have your cam on the case feed turned to the STEEP (pistol )to the left facing the machine and case inserter/dropper.?? Shooting in the dark but you could just for a minute fill the tube and with the handle UP just use your thumb empty the cases into your left hand. that will give you a chance to watch the transition from tube to plate with out getting tangled up. Single operation observations will tell you more than when loading in most cases. Bless Nzzzzzzz
  10. I use win, primers ONLY and they works great. A buddy used the loader for his 38 super and he put CCI s in and you could not even feel them seat. Was so smooth. You could call Dillon and they will give you an alignment tool FREE. Check the size of seater you are using and check the timeing, AND just look and see if the primer seater is aligned with the shell plate . Blessings
×
×
  • Create New...