reaper1

I solved all issues once and for all, but I had to change some things mentioned below: - barrel - slide - grips - all springs - hammer - sights - trigger (for SA) - painted to black - some other minor changes This is how my issue-free gun looks like: Thanks You ALL for your time trying to solve my problem, I really do appreciate it.

This is nightmare! I came back to the original springs (hammer, recoil, fire pin), plus extra power extractor's spring is on its way Decision, however, has been made and I'm waiting for my brand new CZ Tactical Sport Orange. I don't know what happend but here in Poland best shooters switched from Tanfos to CZs and gunsmiths (I asked to fix my STOCK II) are like : "Not a f*** chance, I will not touch this s*** anymore" Worst spent money ever! Chamber is polished, extractor and extractor's spring are new - didn't help. I'll see next Sunday with stock springs.

Today yet another FTE I've noticed a mark on the shell - seems like the extractor slipped off the edge PS. It was factory ammo S&B Subsonic 9,7g

In my case brass stays in the chamber and another round tries to get in causing double -feed and very bad jam. My Tanfo's chamber looks really good compared to the photos in this thread. So, I really hope that it was one and last time accident (FTE). We will see very soon, another competitions are coming very soon, will let You know.

Agrrrrr :/ I had Failure To Feed issue, and now Failure to Extract. My case (FTF and FTE you can find here): Well, recently I had 1x FTE with brand new extractor and extractor's spring - I really hope it was due to sand (sand was wet and very sticky). If not, I have not a clue. My mags (all) have the same dimensions, chamber is smooth and polished - have no idea what else could it be, so I really hope it was one-time accident.

Yet another 6 stages I shoot recently and 1x Failure To Extract I really hope that was caused by the sand (new extraqctor, new extractor's spring).

Thanks again. Sorry for asking the same question 3 times. I have to make purchase abroad, so to me it will be +extra money for package, this is why I need to be sure what exactly shoud be in it. See, there's no info on Eric's page that Xtreme Firing Pin BLOCK is required for Titan Hammer - I can only imagine my disappointment during upgrade my gun, so thanks yet again.

It came with 2-piece sear and I change it to Xtreme Sear (1-piece). I didn't change the firing pin block. My colleague did exactly the same and it works for him too. So, perhaps titan hammer requires alno Xtreme Firing Pin Block.

I have one piece sear with stock fire pin block (safety) and all is working correctly. But I don't have yet a Titan Hammer and as MemphisMechanic said a combination of One Piece Sear + Titan Hammer cause the need of install Xtreme Firing Pin Safety. My concern is that Xtreme Firing Pin is longer than standard Firing Pin and seems like this difference causes the need of Safety Block replacement - but I'm not sure anymore.

RE: "You will need this because of the Titan hammer’s repoisitioned hooks. It lifts the plunger less. You need this longer plunger to match up to the Titan & One-piece sear combination." We are talking about Firing Pin SAFETY? On Eric's www it says (about this safety): " +0.3mm to be used with Xtreme Firing Pin. " And in description of Xtreme Firing Pin: " New Tanfoglio Xtreme Firing Pin, especially designed to work with firing pin safety! " So I assume this xtreme firing pin safety will only work with xtreme firing pin, am I'm right? PS. I already have installed Xtreme Sear and it works (if it makes any difference).

I'm using this one (below is my firing pics from 2 angles), so this is one on the left ON YOUR PIC. This IS NOT Xtreme firing pin, but is good enough not to change it?

Thanks for all info. I prepared a list of parts that I should replace, but I'm not sure if all of them are really needed to be replaced: - Hammer (xtreme titan) - Hammer Spring (Patriot Defense: 15.5 lb and 14 lb) - Firing Pin (xtreme) together with Xtreme Firing Pin Safety - I'm not sure if I need these parts (some say that because of Titan Hammer I also have to replace Firing Pin) - due to above also Firing Pin Spring (Patriot Defense) - Xtreme Interruptor - Trigger spring (Patriot Defense) - Sear spring (Patriot Defense) - Trigger Bar (Xtreme) - Trigger Bar Guide (Xtreme) - hammer strut (this one I'm not sure if I need new one or the strut can be used from currently installed hammer?) - hammer strut pin - as above - hammer interruptor pin - as above Recently you helped me with Failure To Feed issue and I really don't want to jump from one issue to another - this is why I'm asking questions. If you could help me ones again, I'd appreciate it.

I understood all except "plunger spring", I'm not sure what part is this. Is it the same as Trigger Bar Guide? https://www.ericgrauffelonlineshop.com/en/xtreme-parts-/356-trigger-bar-guide.html PS. Plunk Test - passed The round makes very nice plunk sound when dropped into the chamber, plus it can be easily rotated inside. I already fired >3000 rounds, so I guess the gun is smoothed out.

You mean Trigger and Sear springs OR also Hammer and Firing Pin springs? If also I should change Hammer Spring (I already have the one from Xtreme: medium) then which one should I choose (10, 12, 13, 14, 15.5 lb)? Firing Pin I also already have from Xtreme (also Medium)

Ok, so bottom line I can replace all parts to Xtreme (hammer, interruptor, trigger bar), plus Springs (trigger and sear) to Patriot Defense (or even do not change those springs at all) and I will have exactly the same triggers as in Tanfoglio Xtreme and better looking gun at the same time, right?