Doctor

its from the 80;s i hcw no idea how many rounds went through but i will shoot a couple of hundred more its a 950

i bought a berreta 22 short pop up barrel gun, i t fires but then the last round always stovepipes i used two brands of 22 short high velocity ammo and i am wondering if the high velocity is the problem i am ordering standard velocity but im not sure that will help and ideas?

i shoot lever action rifle with my 30-30 i have been usng imr 4064 does accurate 4064 make a difference in accuracy once the rifle is sited in with imr?

no, i didnt confuse the tubes. the blue one tip magazine...i twisted it in and the yellow tip, i did invert it to get it inot the primer loader. but its still hopeless HELP PlEASE

after not using the rl 550, i wanted to load 380 with small pistol primers. I used the yellow loading tip and the primers got stuck in the plastic. i had another new one and replaced it but they still became stuck sometimes. I put the blue tipped magazine tube in and turned it so it clicked. The primers completely emptied out of the tube on to the press. The plastic rod that keeps the primers tamped down and the battery primer warning device went on because none of the primers stayed in the tube. Now i KNOW i am doing something completely wrong. Help please. !!!!!!!!!!!!!!!!! I read the manual and i still am stumpedGeoffrey P. Radoff,M.D

these are lead alloy tumbled in moly, i cant find any handload for power pistol for these projectiles any ideas and thoughts would be helpful thank you geoffrey radoff, m.d.

thank you Geoffrey P.Radoff,M.D.

i am not sure what number the brass pins that keep the brass in place are they number three , like the 9 mm? or?

the dillon is progressive, my rcbs is single stage and for the rcbs, i used one shot, deprimed and then tumbled and did the rest of the reloading.for the dillon, should i tumble first, then use the one shot and do the rest of the process? But that leaves the one shot on without cleaning. what is the correct way to do the reload geoffrey radoff

using one shot on 32 20 new unshot cases, how long do you need to tumble before powder and bullet loading?

i am shooting 100gr Hornaday xtp projectiles with 4276 powder. I can't get the powder but i can get reloader 7 anyone have loads they use with this combination?

why do you need to crimp the brass? for a revolver just for fun target practice, is it really necessary? will the setback be problem if not crimped?

i just bought a desert eagle 1911. The trigger is 3.5 pounds our of the box. It is not as smooth as my high end 1911's and i was wondering how to get the trigger as good as one can get it. dont shoot competitively except silhouette rifle and we have 2 pound triggers. Should i purchase a wilson combat trigger and whatever else or have a smith rework the trigger...for three pounds or 3.5 pounds? thanks

factory ammo stovepipes often but my reloads with 5.2 power pistol 115 gr hornady fire all the time? need to only replace the recoil spring?

I just picked up a 45cal 1911 and i want to improve the trigger. I am used to 2 pound triggers with my rifle silhouette and i want to have installed a high quality trigger. I would like some suggestions. I have read, changing the hammer and other parts is reasonable too. Any suggestions are appreciated and if anyone knows a great gunsmith in the phoenix az area, i would appreciate it