Jump to content
Brian Enos's Forums... Maku mozo!

Retread1911

Classifieds
  • Posts

    464
  • Joined

  • Last visited

Everything posted by Retread1911

  1. Good Morning Benoverse. I am dealing with my Dads estate this weekend and one thing that I would like to sell is his complete set of Gun test magazines. It appears to be a complete set from the beginning of the collection. Before I randomly pick a price does anyone know what these might be worth? Sent from my iPhone using Tapatalk
  2. Did you make a choice? I would go for .40 long if it were me but then again I was never a fan of the 10mm even in the BREN 10 days. . . GT
  3. I actually have three categories 1) Practice only - I bought some older reloads from the one person on the planet I will shoot his ammo - This has no gauging involved and no consistency worries - gauging rejects also go in this category 2) Local match - Mostly Gauged - run this in practice and in local matches - Bulk packaged. most makes major but these loads tend to be right at 165 3) Major Match - 100% gauged everything at 1.195 (Limited shooter running .40 cal) running Montana Gold FMJ 180 projectiles at 170 PF I used to use the Push through die for the Major match ammo but have quit and just throw those that do not drop into the cause gauge into the Practice only buckets. Cheers GT
  4. How old is it? Sounds to me like it is time for a new spring and or some cleaning and lubrication. GT
  5. Wow that is certainly a piece of history. GT
  6. Do you have any weight on the top of the plastic Rod? If not put a ~200 grain weight on it. I have seed 45 ACP Cases, 45/40 cal projectiles. Essentially when you get down to less than 25 primers the weight isn't enough to keep the primers moving through the tip as they should. HTH. GT
  7. Evening Paul. I was very hopeful, as I am sure you are now, to see if I could convert P14 mags to run in a P16. I found 2 issues when I started down the road. 1) feed lips are just a bit wide. No problem I took some material out and welded it back up. 2) The width on the 45 mag is too wide. This is the one that took my attempts out. If you can squeeze the feed lips and get a spacer to work you just might be able to make it happen. Other than that I would say simply use it as a barny mag and move on. George
  8. Thanks guys! Too bad the rep I got a Dillon didn't know that when I ordered another 100$ of parts yesterday. Would have been nice to have saved the extra shipping. GT
  9. Well Benoverse, I have been challenged to swage some 40 cal ammo for a friend and started looking at my 40 cal head for the 1050 and realized there is no backup rod for the swage station. Then I realized I had never before Swaged 40 cal ammo. So what are people using? The 9mm backup rod? Should work just fine but thought I would ask before I just assumed. And yes I called Dillon this afternoon to order one and found that they don't have one either. Their 1050 conversion kit for 10mm and 40 has a 'expander' in it not a back up rod. Cheers And for those that are wondering I have heard that the Coast Guard has requested 40 cal be crimped for water proofing. GT
  10. Now that this has been a while I have loaded .45 ACP again several times manually and can attest that the Large Swag rod locks the press up pretty tight. While I do not load with an Autodrive I would imagine that when adjusted properly (And that is the trick) you would be able to stop the press with the swag rod in a SPP. I do have a buddy (Ken Birdsell) who loads with an Autodrive in 9mm. From what I have seen of his setup I do not load the quantities that would benifit from the AutoDrive. Cheers. GT
  11. They are well worth the wait. I love my SVI. I just need to decide on the next order and get in line.
  12. Very similar. http://www.spikestactical.com/st22-parts-c-146_75.html In just looking at the pictures I think I like the seeking better.
  13. If you,want to replace the can with a flash hider the 5.5 inch ones popular back in the 90's might extend the barrel enough to run the same hand guard without the can. Just an idea.
  14. Well bummer. Cheaper than Dirt has moved their store to far away for a lunch run.
  15. http://www.seekinsprecision.com/parts-and-accessories/handguards/bar-hand-guards.html I really like this design and it is available currently so that is big bonus. Oh and Cheaper than Dirt is a dealer and close enough for me to go at lunch ::grin::
  16. http://aeroprecisionusa.com/aspx/store/productdetail.aspx?pid=272Is the link to the 15 inch version. Yes it reports a 1.5 inch suppressor will fit nicely. and an ID of 1.8 inches. The biggest drawback is that it appears to require their upper. . . Direct quote from above link "This handguard does not come with a barrel nut to attach it to a standard upper. They will bolt directly to our M4E1 upper receiver." Perhaps there are others that don't require the dedicated hand guard. GT Whoa, link went to the wrong place entirely. http://aeroprecisionusa.com/aspx/store/productdetail.aspx?pid=58 Try this one. It's a monolithic upper, but it looks awesome on a BLK pistol: https://dl.dropboxusercontent.com/u/11646828/AR-15Pistol.jpg So, yeah, I'm suggesting something that just mates with their upper because it is an upper. You are correct your pistol looks awesome! And the price is just a little more than the parts required combined. So can you do me one more favor? Can you measure the narrowest Inner diameter of yours at the barrel end? Thanks. George.
  17. Rock solid on mine Any one know a seller that has one? 12 or 15 inch would both be good.
  18. http://aeroprecisionusa.com/aspx/store/productdetail.aspx?pid=272 Is the link to the 15 inch version. Yes it reports a 1.5 inch suppressor will fit nicely. and an ID of 1.8 inches. The biggest drawback is that it appears to require their upper. . . Direct quote from above link "This handguard does not come with a barrel nut to attach it to a standard upper. They will bolt directly to our M4E1 upper receiver." Perhaps there are others that don't require the dedicated hand guard. GT
  19. Great Suggestion on the MCSR. Have you ran one? Any movement out at the end? Link for anyone that wanted to look too: http://www.seekinsprecision.com/mcsr-v2-mod-rail.html
  20. What do you guys think of the JP handgaurds. . . Pricy I know but rock solid, durable and most importantly the right size. http://www.jprifles.com/buy.php?item=JPHG-1M
  21. Thanks for the Info . . . But the ID is not big enough according to their Web Site. http://fortismfg.com/ar15-fortis-REV-free-float-rail-system-12-forearm-12 I get the temp issue but that is not a concern in this build. GT
  22. OK Gang I am building a 300 BLK upper in a Suppressed 8" build. I want the handgaurd to come down and cover the first few inches of the can thus it needs to be longer than 9 inches and have an inner diameter bigger than the outer diameter of the can which is 1.625 I have been looking at the Rock River parts and some of them I like the look of but they do not lock in place securely enough for my tastes. I do love the POF stuff but they don't sell just that part and I am not sure of the ID. So here is the question. What handgaurd locks in place with the Upper and has a Inner diameter of 1. 750 inches? OAL of the handgaurd also has to be longer than 9 inches. . . Thanks for any advice you have. Thanks in Advance.
  23. That is very true I didn't post the entire parts order. I put together a list and chatted with Bob in sales and IIRC here is the list Primer tube(s) Primer Shield Primer cap (Blue and Red) Primer cap nut (Top of the primer shield) Some of the items that I did not order but were considered Primer Slide After clean up it was fine. Rubber for the primer slide - I had a bunch of heater hose already Everything else was undamaged just dirty. GT
×
×
  • Create New...