Jump to content
Brian Enos's Forums... Maku mozo!

gunzoo

Members
  • Posts

    22
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Location
    Jacksonville,FL
  • Interests
    IDPA, USPSA, Long Range Rifle, Reloading, and shooting...lots of shooting!
  • Real Name
    Michael MacDonald

gunzoo's Achievements

Looks for Range

Looks for Range (1/11)

  1. Memphis, What's the lot number on the bottom of that jug? I'm running 4.3gr of Solo at 1.135" under a 147gr MG and it's moving at 904fps on avg with a SD of 15ish. The lot number on mine is #1930. ~Mac
  2. I'm trying to lower my cost per 1k 147gr 9mm rounds and my pursuit has led me to a manufacturer called Unique Precision Bullets. They are selling 9mm 147gr lead bullets for only $48.00 per 1k. Have you ever dealt with these folks?
  3. Great advice everyone! I'll work on the dry-fire drills on the days I dont shoot and see if I can clean this up. When I shoot under 15-yards, I hit a little low but usually zero or one down. I think the low shooting is amplified at distance so it probably is me yanking the barrel down as I pull the trigger. Thanks for all your feedback!
  4. My skills are improving and the time at the range is helping immensely but I'm having one heck of time with long shots. When taking shots of 20-yards or more, my shots are hitting insanely low. On an IDPA target, I aim at the "-0" and I end up hitting "-3". THis ends up being 12"-18" low. I'm lining up the front sites and taking the extra time to make the shot but for some reason, I'm blowing the shot consistently. Any thoughts on what my issue is or what I can do? I'm shooting a Glock 34 with 147gr bullets. Thanks, ~Mac
  5. Glock 34 147gr Truncated Cone, Montana Gold - Seated at 1.135" 4.3gr Solo 1000 (Slow jug of powder! Always start low and work up YOUR own load for YOUR safety!) Mixed Brass Wolf Small Pistol Primers Averages 920fps/135pf out of a Lone Wolf barrel
  6. gunzoo

    TruGrip for G34

    I don't see an option for G34 on the TruGrip website. What option should I select? Also, what's your opinion on TruGrip? Would you use something different? Until today I thought grip tape was unnecessary and something for those shooters who install every mod possible thinking it will help them shoot better when actually shooting more is what they need. Basically, it was hot as crap out today and my hands were sweating like crazy and the gun was slipping in my hand constantly. Thanks, ~Mac
  7. I forgot to add that I checked my weight on both my RCBS Digital Scale AND my Lee beam scale. Also, I chorny'd my loads on my Shooting Chrony Alpha Master Chronograph and my friends CED Millennium 2 chrony. Both scales show the loads to be within 0.10 of a grain and both chronographs were within 25fps of one another. I'm telling ya, this jug shoots slow! It is in an Accurate branded jug and I bought it from Powder Valley. Besides the velocity being poor it does shoot cleaner than any powder I've ever seen. The brass that is ejected almost looks new. Too bad I don't care about clean as much as making a decent power factor without blowing up my gun or myself. My final judgment is this: The powder burns slow and at these slow rates of speed the pressure cannot be too high as to cause damage (hopefully). I'm shooting in the SC State IDPA Championship at the end of April and dont have time to work up another powder as I need to spend every free second shooting/training. I'll run with this then hope that some Titegroup becomes available and I'll make the switch. I just don't feel good about this powder long-term. Like I said, clean burning is good but I can clean my gun and tumble my brass, I need safe and mildly fast powder.
  8. So I just got home from the range and shot a few rounds through the chrony. I ran with 4.3gr's at a length of 1.135". The top of the primer looked somewhat flat but the sides were rounded. I'm no "high-pressure sign expert" but with the numbers below, I don't think the pressure was too high on these. Results from 4, 10-shot, groups below. I'm cutting it close with these numbers. Should I add another 0.01gr or decrease the OAL to 1.125"? Thoughts? Gun: Glock 34 Barrel: Glock Factory Recoil Spring: ISMI 13 pound Striker Spring: Wolf 4 pound Powder: Solo-1000 Powder Charge 4.3gr OAL: 1.135" Bullet Used: Montana Gold Bullet Weight: 147gr Brass Used: Blazer >>>>>>>>>>>>>>>>>>>>>> 1st string of 10-shots LOW: 861 HIGH: 889 AVG: 874 ES: 27.1 SD: 10.13 >>>>>>>>>>>>>>>>>>>>>> 2nd string of 10-shots LOW: 855 HIGH: 909 AVG: 875 ES: 54.08 SD: 16.37 >>>>>>>>>>>>>>>>>>>>>> 3rd string of 10-shots LOW: 870 HIGH: 915 AVG: 895 ES: 45.26 SD: 14.56 >>>>>>>>>>>>>>>>>>>>>> 4th string of 10-shots LOW: 856 HIGH: 910 AVG: 876.5 ES: 53.35 SD: 16.03 >>>>>>>>>>>>>>>>>>>>>>
  9. I just wanted to post a follow-up on this thread. Ever since I started concentrating on REALLY seating the primer firmly, I've had a dramatic reduction in light primer strikes. Maybe 1 per 150. I haven't even installed the lightened firing-pin yet and I think once I do, I don't think I'll see a light primer strike again ::fingers-crossed:: Note to self: SEAT THE CRAP OUTTA THOSE PRIMERS!
  10. I have some 4.0gr and 4.3gr loads ready to test. We shall see where I stand on Tuesday. I'm starting to think 124gr with Unique powder ain't sounding so bad right now! Trust me, I know. I have some Unique laying around (used it on 124gr's I was shooting) and may try it to see whats going on. No lot number on the jug, just a bar code. I am weighing every 5th round and loading about 50 rounds for each increment in powder.
  11. It appears Solo-1000 is indeed slow. I ran up to 3.7 grains today (1.12") used the same head-stamp (Winchester) and had the following: AVG 804fps SD: 12.4fps LOW: 742fps HIGH: 828fps (HUGE difference between the high and low) I'm gonna load some 3.9's and some 4.1's. I'll probably load a few 4.3's (dangerous? Who knows with this load!!!) as well because I don't think I can tolerate another day driving 50-miles round-trip to the range and have loads that wouldn't even penetrate wet paper (exaggeration I know, but the frustration has set in). I'll update everyone Tuesday. Hopefully I'll report I'm at 130pf. Otherwise I'm gonna flush all 8 pounds of this crap/gunpowder. I really wanted Tite Group but I could not find it anywhere and this tied with WIN 231 as I'm gonna shoot lead as well.
  12. The reason i'm varying lengths is I'm scared to increase the charge as I've heard 3.0 gr is the max for Solo-1000.
  13. I jut got back from the range and am a little concerned. I loaded up a few diff length loads,packed up the chrony, and hit the range. I'm trying to build up a load that will hover just above the IDPA Power Factor. (Power Factor = Bullet Velocity in feet per second multiplied by Bullet Weight in grains.) I'm running a 147gr bullet so I need at least 851 fps. As you can see from my number below, I'm way off. The rounds in the 1.14" length had the highest fps but still way off. The rounds in the 1.13" and 1.15" range sucked and had major cycling problems in my gun, and they also were super slow. Let me know where you think I should go from here. Your feedback is, as always, greatly appreciated. PARTICULARS: ------------- Gun: Glock 34 Barrel: Storm Lake Recoil Spring: ISMI 13 pound Striker Spring: Wolf 4 pound Powder: Solo-1000 Powder Charge 3.4gr Bullet Used: Montana Gold Bullet Weight: 147gr Brass Used: Various once-fired cases LOAD RESULTS >>>>>>>>>>>>>>>>>>>>>> 1.14" avg = 784fps OAL ---fps --------------- 1.144 ---775 1.147 ---786 1.146 ---782 1.144 ---793 1.145 ---784 1.145 ---786 1.144 ---777 1.145 ---770 1.142 ---797 1.146 ---794 >>>>>>>>>>>>>>>>>>>>>> 1.13" avg = 747fps OAL ---fps --------------- 1.136 ---737 1.136 ---733 1.136 ---759 1.131 ---756 1.137 ---742 1.135 ---753 1.132 ---748 1.133 ---749 1.138 ---737 1.139 ---756 >>>>>>>>>>>>>>>>>>>>>> 1.15" avg = 755fps OAL ---fps --------------- 1.159 ---730 1.158 ---779 1.155 ---777 1.155 ---754 1.153 ---754 1.159 ---757 1.151 ---774 1.158 ---741 1.156 ---762 1.158 ---730
  14. UPDATE Today was a range day and I ran across a few thousand Winchester small pistol primers and decided to load them up and compare them on the range. I'm loading on a Dillon 650 and decided to be extra firm on the seating stroke of each primer. I shot 250 rounds with ZERO failures. I switched over to Wolf primed rounds and had one failure to ignite out of 100. The lesson I learned was primers matter and seating them properly matters a lot. Also, I'll def buy a lighter firing-pin and hopefully that will be that. God I love shooting!!! ~Mac
×
×
  • Create New...