Jump to content
Brian Enos's Forums... Maku mozo!

EkuJustice

Classifieds
  • Posts

    3,368
  • Joined

  • Last visited

Everything posted by EkuJustice

  1. I think it’s stage dependent. There are some that a pistol is faster and others a pcc is faster. Long shots with a ton of long partials pcc. Tight shots a ton of windows or means pistol is faster.
  2. What the unintended shot is if your coming into the target and break the shot early. This is not the case
  3. So this is getting pretty old at work. Have a back that's just destroyed from an auto wreck and working for myself It's no work no money. How do I get to spend my work days? Watching others screw the system and put on a great show for the dr while prancing around like Richard Simmons every other day. I get to sit there in agony where i have puked it hurt so bad, collapsed on the floor when got home and Just slept there because I couldn't drag myself up and popping Advil like candy. It is just getting old watching these people put on a show to draw a check while I kill my self out there working to earn mine watching them
  4. Steel may be a good intro if she will try that. No draws reloads and minimal if any moving and you can shoot 22 rifles and pistols.
  5. They will all crack eventually if you shoot a lot through them. If you get 75-100+k out of them it is often still covered unless way to light i.e. Sti is I think 10.5 oz. if not it's not that expensive for the use you got
  6. That's one of the issues. Take everything you know about loading for a non comp gun and toss it. In a non comp gun you want heavy bullets and fast powder. With the comp you want a light load and a slow powder and don't be afraid to push the load some even for 3 gun. The hotter load made for open with a slow powder will be flatter than basically a limited gun with a dot. With that load gonna need a 11 pound or do and even then it won't throw them far.
  7. None of mine lock back. For one I don't like loading a 2011 to a locked back slide as its too easy to over insert the mag and snap an ejector. Other reason is the only followers that really consistently lock back well are the factory Sti and you loose capacity. The minimalist followers can be set that way and do work but don't always stay that way when springs wear, get bent a little etc.
  8. The big thing is consistent. The super fast load helps on occasion but not often. Shooting on the move may or may not be an advantage and sometimes it is sometimes it isn't. Sometimes better to sprint and post up
  9. I know I can choke an inertia gun based on how i hold it with 1 1/8 oz 1145 fps loads. If i go 1200fps it's much better but occasionally I can choke it. With 1250-1300 fps never gonna choke for me. I am use to shooting Claus so I shoot the gun with a vary aggressive stance and really hold it tight
  10. I think quads have the potential to be faster but for the the vast majority of the people are not worth it. The load 2 is much easier to learn and be proficient and consistent with than quads. The amount of time needed to get consistent and fast with quads in match conditions is much higher than loading 2. A lot of people are doing quads because they see the videos of the top few doing it lightning fast yet would honestly be better grabbing 2 and shoving them in vs grabbing 4 and having to be way to meticulous that it's vary slow or dropping shells.
  11. The only gun I use one on is my SBR and I use a short one mainly as a hand stop.
  12. Ya I run round nose for best reliability
  13. I epoxy them in with e6000 from walmart in the paint section. I set them up at the top of mag and exploit in. Haven't budged in 2.5years.
  14. The best seating mag I have found is a GI Straight 20 rounder. If I have to load in the clock that's what I use if possible. Index it like a pistol and seat it the same If I have to seat a longer mag I hit the bottom of mag and check its seated
  15. I have shot it with a vortex spitfire at locals. I usually like it for the bay stages and for that it works well. We had a rifle only match after a pistol match where we shot the match with rifles and added a couple extra targets and removed any steel. 3 of the top 4 slots were sub 16 including 1st and second with sbrs and 4th with a pistol If you wanna have fun and shoot it I say go for it.
  16. Why not go 1911 and dsperman grip
  17. I can get 29 with grams follower and spring and TTI 4mm pad. I use a TTI spacer that I epoxy in so it sits higher and dosent drop below the bottom of the tube. I use E6000 and run a bead down the middle then spread out with finger. It holds tight and is vibration and shock resistant so won't crack and fall off spacer has been it like that over 2 years. You can get 28 rounds with factory base pad and spacer and grams guts. With grams I do like the feedlips a little tighter to control the follower more. One of our Jr shooters is using the factory base pad setup and is 22 and 28 rounds
  18. Run 10 rounders and get 1 Springfield mag. It it makes sense to shoot 9 rounds use the 9!rounder 1 time and the rest then need to be loaded to match.
  19. It is a quality belt. Think Double alpha stiffness and CR Speed width so it's not as hard to get stuff on as a double Alpha. They are shooters so not putting their name in a junk belt
  20. Run a 40 here with clays and 165 grain about 134-140 pf. I don't see the disadvantage in the 3 rounds less the 40 has. It may be an extra reload but usually it's not eating any time to do so
  21. Which are you gonna use it more for uspsa it 3 gun. It you are shooting uspsa even close to serious go with a 40. The 9mm in limited is just not competitive in uspsa. The couple extra rounds don't overcome the points lost in uspsa. In 3 gun you really don't loose much if anything going with 40 especially 40minor. As for the gun nothing really wrong with with off the shelf and get it tuned a little i.e. Trigger job etc. A Custom isn't isn't always a get what you pay for. How many customs (from different builders)have been talked about posted with horrid machine work with tool marks all over, stuff that is totally not right like holes for the bomar sight drilled all the way through the slide etc. there usually is a point where the builder does good work and that is after they figure out what they are doing and before they get popular and have such a demand they try and churn them out faster to get more out there.
  22. Yap come out to Bgsl as we have 3 gun uspsa idpa and steel
  23. I would say 45. You can get a competitive gun much cheaper in SS than double stack and mags are cheaper too.
  24. If one breaks or falls out, a fix is eliminate the whole thing and use a friction fit pin. AR15 trigger pin. Cut it right where the grove is and use the outer sides. Fits perfect and is snug and dosent require a sleeve and 2 screws. I had one fall out and found the dimension and tried it and it worked. In 2.5 years, it's still in the gun
  25. Run a 6 inch 40 at minor pf i.e. My limited gun. The 6 inch is nice on 4 in steel
×
×
  • Create New...